كيفية الحصول على البرنامج النصي يونيكس لتشغيل كل 15 ثانية؟
سؤال
ولقد رأيت بعض الحلول، بما في ذلك ساعة وببساطة تشغيل (والنوم) النصي حلقات في الخلفية، ولكن كان لا شيء مثاليا.
ولدي النصي الذي يحتاج لتشغيل كل 15 ثانية، ومنذ سوف كرون لا يدعم ثانية، أنا تركت لمعرفة شيء آخر.
ما هي الطريقة الأكثر قوية وفعالة لتشغيل برنامج نصي كل 15 ثانية على يونكس؟ السيناريو يحتاج لتشغيل أيضا بعد إعادة تشغيل الكمبيوتر.
المحلول
وأود أن استخدام كرون لتشغيل برنامج نصي كل دقيقة، وجعل هذا السيناريو تشغيل السيناريو الخاص بك أربع مرات مع النوم 15 ثانية بين أشواط.
(وهذا يفترض السيناريو الخاص بك سريعة لتشغيل - هل يمكن ضبط أوقات النوم إن لم يكن)
وبهذه الطريقة، يمكنك الحصول على كافة مزايا cron
، وكذلك الخاص 15 ثانية فترة التشغيل.
تعديل: عرض أيضا @ تعليق BMB أدناه
نصائح أخرى
إذا كنت تصر على تشغيل السيناريو الخاص بك من كرون:
* * * * * /foo/bar/your_script
* * * * * sleep 15; /foo/bar/your_script
* * * * * sleep 30; /foo/bar/your_script
* * * * * sleep 45; /foo/bar/your_script
واستبدال اسم السيناريو الخاص بك ومسار ل/ فو / شريط / your_script
ونسخة معدلة من أعلاه:
mkdir /etc/cron.15sec
mkdir /etc/cron.minute
mkdir /etc/cron.5minute
وإضافة إلى / الخ / كرونتاب:
* * * * * root run-parts /etc/cron.15sec > /dev/null 2> /dev/null
* * * * * root sleep 15; run-parts /etc/cron.15sec > /dev/null 2> /dev/null
* * * * * root sleep 30; run-parts /etc/cron.15sec > /dev/null 2> /dev/null
* * * * * root sleep 45; run-parts /etc/cron.15sec > /dev/null 2> /dev/null
* * * * * root run-parts /etc/cron.minute > /dev/null 2> /dev/null
*/5 * * * * root run-parts /etc/cron.5minute > /dev/null 2> /dev/null
ولن تشغيل هذا في الخلفية تفعل ذلك؟
#!/bin/sh
while [ 1 ]; do
echo "Hell yeah!" &
sleep 15
done
وهذا هو حول كفاءة كما يحصل. الجزء المهم يحصل سوى تنفيذ كل 15 ثانية، والسيناريو ينام تبقى من الوقت (وبالتالي عدم إضاعة دورات).
وكتبت جدولة أسرع من كرون. لقد نفذت أيضا حارس متداخلة. يمكنك تكوين جدولة لعدم بدء عملية جديدة إذا السابق لا يزال قيد التشغيل. نلقي نظرة على https://github.com/sioux1977/scheduler/wiki
استخدم nanosleep (2) . ويستخدم timespec
الهيكل الذي يستخدم لتحديد فترات من الوقت مع النانوسيكند الدقة.
struct timespec {
time_t tv_sec; /* seconds */
long tv_nsec; /* nanoseconds */
};
#! /bin/sh
# Run all programs in a directory in parallel
# Usage: run-parallel directory delay
# Copyright 2013 by Marc Perkel
# docs at http://wiki.junkemailfilter.com/index.php/How_to_run_a_Linux_script_every_few_seconds_under_cron"
# Free to use with attribution
if [ $# -eq 0 ]
then
echo
echo "run-parallel by Marc Perkel"
echo
echo "This program is used to run all programs in a directory in parallel"
echo "or to rerun them every X seconds for one minute."
echo "Think of this program as cron with seconds resolution."
echo
echo "Usage: run-parallel [directory] [delay]"
echo
echo "Examples:"
echo " run-parallel /etc/cron.20sec 20"
echo " run-parallel 20"
echo " # Runs all executable files in /etc/cron.20sec every 20 seconds or 3 times a minute."
echo
echo "If delay parameter is missing it runs everything once and exits."
echo "If only delay is passed then the directory /etc/cron.[delay]sec is assumed."
echo
echo 'if "cronsec" is passed then it runs all of these delays 2 3 4 5 6 10 12 15 20 30'
echo "resulting in 30 20 15 12 10 6 5 4 3 2 executions per minute."
echo
exit
fi
# If "cronsec" is passed as a parameter then run all the delays in parallel
if [ $1 = cronsec ]
then
$0 2 &
$0 3 &
$0 4 &
$0 5 &
$0 6 &
$0 10 &
$0 12 &
$0 15 &
$0 20 &
$0 30 &
exit
fi
# Set the directory to first prameter and delay to second parameter
dir=$1
delay=$2
# If only parameter is 2,3,4,5,6,10,12,15,20,30 then automatically calculate
# the standard directory name /etc/cron.[delay]sec
if [[ "$1" =~ ^(2|3|4|5|6|10|12|15|20|30)$ ]]
then
dir="/etc/cron.$1sec"
delay=$1
fi
# Exit if directory doesn't exist or has no files
if [ ! "$(ls -A $dir/)" ]
then
exit
fi
# Sleep if both $delay and $counter are set
if [ ! -z $delay ] && [ ! -z $counter ]
then
sleep $delay
fi
# Set counter to 0 if not set
if [ -z $counter ]
then
counter=0
fi
# Run all the programs in the directory in parallel
# Use of timeout ensures that the processes are killed if they run too long
for program in $dir/* ; do
if [ -x $program ]
then
if [ "0$delay" -gt 1 ]
then
timeout $delay $program &> /dev/null &
else
$program &> /dev/null &
fi
fi
done
# If delay not set then we're done
if [ -z $delay ]
then
exit
fi
# Add delay to counter
counter=$(( $counter + $delay ))
# If minute is not up - call self recursively
if [ $counter -lt 60 ]
then
. $0 $dir $delay &
fi
# Otherwise we're done
ومنذ جوابي السابقة خطرت لي حل آخر أن يختلف وربما أفضل. يسمح هذا الرمز العمليات ليتم تشغيلها أكثر من 60 مرة في الدقيقة مع ميكروثانية الدقة. كنت في حاجة إلى برنامج usleep لجعل هذا العمل. يجب أن تكون جيدة ليصل إلى 50 مرة في الثانية.
#! /bin/sh
# Microsecond Cron
# Usage: cron-ms start
# Copyright 2014 by Marc Perkel
# docs at http://wiki.junkemailfilter.com/index.php/How_to_run_a_Linux_script_every_few_seconds_under_cron"
# Free to use with attribution
basedir=/etc/cron-ms
if [ $# -eq 0 ]
then
echo
echo "cron-ms by Marc Perkel"
echo
echo "This program is used to run all programs in a directory in parallel every X times per minute."
echo "Think of this program as cron with microseconds resolution."
echo
echo "Usage: cron-ms start"
echo
echo "The scheduling is done by creating directories with the number of"
echo "executions per minute as part of the directory name."
echo
echo "Examples:"
echo " /etc/cron-ms/7 # Executes everything in that directory 7 times a minute"
echo " /etc/cron-ms/30 # Executes everything in that directory 30 times a minute"
echo " /etc/cron-ms/600 # Executes everything in that directory 10 times a second"
echo " /etc/cron-ms/2400 # Executes everything in that directory 40 times a second"
echo
exit
fi
# If "start" is passed as a parameter then run all the loops in parallel
# The number of the directory is the number of executions per minute
# Since cron isn't accurate we need to start at top of next minute
if [ $1 = start ]
then
for dir in $basedir/* ; do
$0 ${dir##*/} 60000000 &
done
exit
fi
# Loops per minute and the next interval are passed on the command line with each loop
loops=$1
next_interval=$2
# Sleeps until a specific part of a minute with microsecond resolution. 60000000 is full minute
usleep $(( $next_interval - 10#$(date +%S%N) / 1000 ))
# Run all the programs in the directory in parallel
for program in $basedir/$loops/* ; do
if [ -x $program ]
then
$program &> /dev/null &
fi
done
# Calculate next_interval
next_interval=$(($next_interval % 60000000 + (60000000 / $loops) ))
# If minute is not up - call self recursively
if [ $next_interval -lt $(( 60000000 / $loops * $loops)) ]
then
. $0 $loops $next_interval &
fi
# Otherwise we're done
لتجنب التداخل المحتمل للتنفيذ، واستخدام آلية قفل كما هو موضح في أن <لأ href = "https://stackoverflow.com/questions/5428631/php-preventing-collision-in-cron-file-lock-safe "> موضوع .