لا يمكن تجميع ملف demokit.pde لنظام Android ADK

Question

لقد بدأت في اختبار android ADK باستخدام لوحة Arduino Mega 2560 مع درع مضيف.لقد حصلت على ملف demokit.pde إلى aruduino IDE كما قدمت وثائق android.لكن لا يمكنني تجميع ملف demokit.pde لتحميله على لوحة Arduino.يمكن لأي شخص أن يساعدني مع بعض النصائح؟

شكرا لك مقدما

رسائل الخطأ التي تظهر في Arduino IDE:

In file included from demokit.cpp:1:
/usr/share/arduino/libraries/Wire/Wire.h:23:22: error: /usr/share/arduino/libraries/USB_Host_Shield/inttypes.h: Permission denied
demokit.cpp:4:22: error: /usr/share/arduino/libraries/USB_Host_Shield/Max3421e.h: Permission denied
demokit.cpp:5:17: error: /usr/share/arduino/libraries/USB_Host_Shield/Usb.h: Permission denied
demokit.cpp:6:30: error: /usr/share/arduino/libraries/USB_Host_Shield/AndroidAccessory.h: Permission denied
demokit.cpp:8:22: error: /usr/share/arduino/libraries/USB_Host_Shield/CapSense.h: Permission denied
In file included from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:4:20: error: /usr/share/arduino/libraries/USB_Host_Shield/stdlib.h: Permission denied
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:5:20: error: /usr/share/arduino/libraries/USB_Host_Shield/string.h: Permission denied
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:6:18: error: /usr/share/arduino/libraries/USB_Host_Shield/math.h: Permission denied
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:8:27: error: /usr/share/arduino/libraries/USB_Host_Shield/avr/interrupt.h: Permission denied
In file included from /usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:10,
                 from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:28:20: error: /usr/share/arduino/libraries/USB_Host_Shield/avr/io.h: Permission denied
In file included from /usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:13,
                 from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:23:19: error: /usr/share/arduino/libraries/USB_Host_Shield/ctype.h: Permission denied
In file included from /usr/share/arduino/hardware/arduino/cores/arduino/Stream.h:24,
                 from /usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:27,
                 from /usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:15,
                 from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h:24:33: error: /usr/share/arduino/libraries/USB_Host_Shield/stdio.h: Permission denied
In file included from demokit.cpp:1:
/usr/share/arduino/libraries/Wire/Wire.h:30: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:31: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:32: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:34: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:35: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:36: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:37: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:39: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:43: error: ‘uint8_t’ has not been declared
/usr/share/arduino/libraries/Wire/Wire.h:47: error: ‘uint8_t’ has not been declared
/usr/share/arduino/libraries/Wire/Wire.h:48: error: ‘void TwoWire::begin(int)’ cannot be overloaded
/usr/share/arduino/libraries/Wire/Wire.h:47: error: with ‘void TwoWire::begin(int)’
/usr/share/arduino/libraries/Wire/Wire.h:49: error: ‘uint8_t’ has not been declared
/usr/share/arduino/libraries/Wire/Wire.h:50: error: ‘void TwoWire::beginTransmission(int)’ cannot be overloaded
/usr/share/arduino/libraries/Wire/Wire.h:49: error: with ‘void TwoWire::beginTransmission(int)’
/usr/share/arduino/libraries/Wire/Wire.h:51: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:52: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:53: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:54: error: ‘uint8_t’ has not been declared
/usr/share/arduino/libraries/Wire/Wire.h:55: error: ‘uint8_t’ has not been declared
/usr/share/arduino/libraries/Wire/Wire.h:55: error: ‘uint8_t’ has not been declared
/usr/share/arduino/libraries/Wire/Wire.h:56: error: ‘void TwoWire::send(int)’ cannot be overloaded
/usr/share/arduino/libraries/Wire/Wire.h:54: error: with ‘void TwoWire::send(int)’
/usr/share/arduino/libraries/Wire/Wire.h:58: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:59: error: ‘uint8_t’ does not name a type
In file included from demokit.cpp:2:
/usr/share/arduino/libraries/Servo/Servo.h:100: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Servo/Servo.h:101: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Servo/Servo.h:113: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Servo/Servo.h:114: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Servo/Servo.h:122: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Servo/Servo.h:123: error: ‘int8_t’ does not name a type
/usr/share/arduino/libraries/Servo/Servo.h:124: error: ‘int8_t’ does not name a type
In file included from /usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:10,
                 from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:104: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:105: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:109: error: variable or field ‘pinMode’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:109: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:109: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:110: error: variable or field ‘digitalWrite’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:110: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:110: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:111: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:112: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:113: error: variable or field ‘analogReference’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:113: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:114: error: variable or field ‘analogWrite’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:114: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:114: error: expected primary-expression before ‘int’
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:120: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:120: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:120: error: expected primary-expression before ‘unsigned’
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:120: error: initializer expression list treated as compound expression
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:122: error: variable or field ‘shiftOut’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:122: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:122: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:122: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:122: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:123: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:125: error: variable or field ‘attachInterrupt’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:125: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:125: error: expected primary-expression before ‘void’
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:125: error: expected primary-expression before ‘int’
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:126: error: variable or field ‘detachInterrupt’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:126: error: ‘uint8_t’ was not declared in this scope
In file included from /usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:13,
                 from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:26: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:27: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:28: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:29: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:30: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:31: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:32: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:33: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:34: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:35: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:36: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:37: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:38: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:46: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:54: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:62: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:69: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:76: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:83: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:90: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:97: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:104: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:112: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:121: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:128: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:136: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h: In function ‘int toAscii(int)’:
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:146: error: ‘toascii’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h: In function ‘int toLowerCase(int)’:
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:158: error: ‘tolower’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h: In function ‘int toUpperCase(int)’:
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:165: error: ‘toupper’ was not declared in this scope
In file included from /usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:14,
                 from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/WString.h: In destructor ‘String::~String()’:
/usr/share/arduino/hardware/arduino/cores/arduino/WString.h:40: error: ‘free’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/WString.h: In member function ‘void String::getBuffer(unsigned int)’:
/usr/share/arduino/hardware/arduino/cores/arduino/WString.h:102: error: ‘malloc’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/WString.h:103: error: ‘NULL’ was not declared in this scope
In file included from /usr/share/arduino/hardware/arduino/cores/arduino/Stream.h:24,
                 from /usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:27,
                 from /usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:15,
                 from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h: At global scope:
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h:37: error: ‘uint8_t’ has not been declared
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h:38: error: ‘uint8_t’ has not been declared
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h:40: error: ‘uint8_t’ has not been declared
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h:42: error: expected ‘,’ or ‘...’ before ‘*’ token
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h:42: error: ISO C++ forbids declaration of ‘uint8_t’ with no type
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h:42: error: ‘virtual void Print::write(int)’ cannot be overloaded
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h:40: error: with ‘virtual void Print::write(int)’
In file included from /usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:15,
                 from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:35: error: ISO C++ forbids declaration of ‘uint8_t’ with no type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:35: error: expected ‘;’ before ‘*’ token
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:36: error: ISO C++ forbids declaration of ‘uint8_t’ with no type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:36: error: expected ‘;’ before ‘*’ token
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:37: error: ISO C++ forbids declaration of ‘uint8_t’ with no type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:37: error: expected ‘;’ before ‘*’ token
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:38: error: ISO C++ forbids declaration of ‘uint8_t’ with no type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:38: error: expected ‘;’ before ‘*’ token
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:39: error: ISO C++ forbids declaration of ‘uint8_t’ with no type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:39: error: expected ‘;’ before ‘*’ token
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:40: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:41: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:42: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:43: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:44: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:47: error: expected ‘,’ or ‘...’ before ‘*’ token
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:50: error: ISO C++ forbids declaration of ‘uint8_t’ with no type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:57: error: ‘uint8_t’ has not been declared
In file included from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:17: error: ‘uint16_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:18: error: ‘uint16_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:22: error: redefinition of ‘long unsigned int pulseIn’
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:120: error: ‘long unsigned int pulseIn’ previously defined here
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:22: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:22: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:22: error: expected primary-expression before ‘unsigned’
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:24: error: variable or field ‘tone’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:24: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:24: error: expected primary-expression before ‘unsigned’
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:24: error: expected primary-expression before ‘unsigned’
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:25: error: variable or field ‘noTone’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:25: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:34: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:35: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:36: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:37: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:38: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:39: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:40: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:41: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:42: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:43: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:44: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:45: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:46: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:47: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:48: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:49: error: ‘uint8_t’ does not name a type
demokit:42: error: ‘AndroidAccessory’ does not name a type
demokit:51: error: ‘CapSense’ does not name a type
demokit.cpp: In function ‘void init_buttons()’:
demokit:58: error: ‘A6’ was not declared in this scope
demokit:58: error: ‘pinMode’ was not declared in this scope
demokit:59: error: ‘A7’ was not declared in this scope
demokit:60: error: ‘A8’ was not declared in this scope
demokit:61: error: ‘A9’ was not declared in this scope
demokit:64: error: ‘digitalWrite’ was not declared in this scope
demokit.cpp: In function ‘void init_relays()’:
demokit:73: error: ‘A0’ was not declared in this scope
demokit:73: error: ‘pinMode’ was not declared in this scope
demokit:74: error: ‘A1’ was not declared in this scope
demokit.cpp: In function ‘void init_leds()’:
demokit:80: error: ‘digitalWrite’ was not declared in this scope
demokit:84: error: ‘pinMode’ was not declared in this scope
demokit.cpp: At global scope:
demokit:107: error: ‘byte’ does not name a type
demokit.cpp: In function ‘void setup()’:
demokit:110: error: ‘Serial’ was not declared in this scope
demokit:119: error: ‘touch_robot’ was not declared in this scope
demokit:121: error: ‘class Servo’ has no member named ‘attach’
demokit:123: error: ‘class Servo’ has no member named ‘attach’
demokit:125: error: ‘class Servo’ has no member named ‘attach’
demokit:129: error: ‘b1’ was not declared in this scope
demokit:129: error: ‘A6’ was not declared in this scope
demokit:129: error: ‘digitalRead’ cannot be used as a function
demokit:130: error: ‘b2’ was not declared in this scope
demokit:130: error: ‘A7’ was not declared in this scope
demokit:130: error: ‘digitalRead’ cannot be used as a function
demokit:131: error: ‘b3’ was not declared in this scope
demokit:131: error: ‘A8’ was not declared in this scope
demokit:131: error: ‘digitalRead’ cannot be used as a function
demokit:132: error: ‘b4’ was not declared in this scope
demokit:132: error: ‘A9’ was not declared in this scope
demokit:132: error: ‘digitalRead’ cannot be used as a function
demokit:133: error: ‘c’ was not declared in this scope
demokit:135: error: ‘acc’ was not declared in this scope
demokit.cpp: In function ‘void loop()’:
demokit:140: error: ‘byte’ was not declared in this scope
demokit:140: error: expected `;' before ‘err’
demokit:141: error: expected `;' before ‘idle’
demokit:142: error: ‘byte’ does not name a type
demokit:143: error: expected `;' before ‘msg’
demokit:146: error: ‘acc’ was not declared in this scope
demokit:147: error: ‘msg’ was not declared in this scope
demokit:149: error: expected `;' before ‘b’
demokit:150: error: ‘uint16_t’ was not declared in this scope
demokit:150: error: expected `;' before ‘val’
demokit:158: error: ‘analogWrite’ was not declared in this scope
demokit:160: error: ‘analogWrite’ was not declared in this scope
demokit:162: error: ‘analogWrite’ was not declared in this scope
demokit:164: error: ‘analogWrite’ was not declared in this scope
demokit:166: error: ‘analogWrite’ was not declared in this scope
demokit:168: error: ‘analogWrite’ was not declared in this scope
demokit:170: error: ‘analogWrite’ was not declared in this scope
demokit:172: error: ‘analogWrite’ was not declared in this scope
demokit:174: error: ‘analogWrite’ was not declared in this scope
demokit:183: error: ‘A0’ was not declared in this scope
demokit:183: error: ‘digitalWrite’ was not declared in this scope
demokit:185: error: ‘A1’ was not declared in this scope
demokit:185: error: ‘digitalWrite’ was not declared in this scope
demokit:191: error: ‘b’ was not declared in this scope
demokit:191: error: ‘A6’ was not declared in this scope
demokit:191: error: ‘digitalRead’ cannot be used as a function
demokit:192: error: ‘b1’ was not declared in this scope
demokit:199: error: ‘A7’ was not declared in this scope
demokit:199: error: ‘digitalRead’ cannot be used as a function
demokit:200: error: ‘b2’ was not declared in this scope
demokit:207: error: ‘A8’ was not declared in this scope
demokit:207: error: ‘digitalRead’ cannot be used as a function
demokit:208: error: ‘b3’ was not declared in this scope
demokit:215: error: ‘A9’ was not declared in this scope
demokit:215: error: ‘digitalRead’ cannot be used as a function
demokit:216: error: ‘b4’ was not declared in this scope
demokit:223: error: ‘count’ was not declared in this scope
demokit:225: error: ‘val’ was not declared in this scope
demokit:225: error: ‘A3’ was not declared in this scope
demokit:225: error: ‘analogRead’ cannot be used as a function
demokit:233: error: ‘A2’ was not declared in this scope
demokit:233: error: ‘analogRead’ cannot be used as a function
demokit:249: error: ‘touch_robot’ was not declared in this scope
demokit:253: error: ‘c’ was not declared in this scope
demokit:265: error: ‘analogWrite’ was not declared in this scope
demokit:277: error: ‘A0’ was not declared in this scope
demokit:277: error: ‘digitalWrite’ was not declared in this scope
demokit:278: error: ‘A1’ was not declared in this scope
demokit.cpp: In function ‘void init_joystick(int)’:
demokit:288: error: ‘byte’ was not declared in this scope
demokit:288: error: expected `;' before ‘status’
demokit:290: error: ‘A9’ was not declared in this scope
demokit:290: error: ‘pinMode’ was not declared in this scope
demokit:291: error: ‘digitalWrite’ was not declared in this scope
demokit:293: error: ‘A10’ was not declared in this scope
demokit:296: error: ‘A11’ was not declared in this scope
demokit:307: error: ‘status’ was not declared in this scope
demokit:308: error: ‘status’ was not declared in this scope
demokit.cpp: In function ‘char joystick_interrupt()’:
demokit:365: error: ‘A10’ was not declared in this scope
demokit:365: error: ‘digitalRead’ cannot be used as a function
demokit.cpp: In function ‘char read_joy_reg(char)’:
demokit:376: error: ‘class TwoWire’ has no member named ‘write’
demokit:377: error: ‘class TwoWire’ has no member named ‘endTransmission’
demokit:379: error: ‘class TwoWire’ has no member named ‘requestFrom’
demokit:381: error: ‘class TwoWire’ has no member named ‘available’
demokit:382: error: ‘class TwoWire’ has no member named ‘read’
demokit.cpp: In function ‘void write_joy_reg(char, char)’:
demokit:390: error: ‘class TwoWire’ has no member named ‘write’
demokit:391: error: ‘class TwoWire’ has no member named ‘write’
demokit:392: error: ‘class TwoWire’ has no member named ‘endTransmission’

Answer 1

كان لدي مشاكل مماثلة مع Arduino 1.0, ، إذا كانت مشكلتك هي نفسها باستخدام إصدار أقدم، فقل Arduino 0023 ينبغي إصلاحه.يمكنك تحميل البرنامج من هنا: http://arduino.cc/en/Main/Software

Answer 2

حتى تتمكن من التخفيض، أو يمكنك إصلاح بعض الأشياء. أستاذ من الألغام وجدت هذا المستودع يحتوي على بديل USB_HOST_SHIELD. انسخ جميع الملفات من هناك إلى الدليل القديم في مجلد ~ / المكتبات. تأكد من أن جميع المكتبات الخاصة بك موجودة في ~ / كراسة الرسم / المكتبات / ثم أعد تشغيل IDE (الإصدار 1.0!). انتقل إلى File-> Sketchbook-> المكتبات-> usb_host_shield-> adk-> demokit-20.

تحتاج أيضا إلى تحديث AndroidAccessory.h. سيكون هذا في ~ / كراسة الرسم / المكتبات / android accesory، ونأمل. افتح هذا الأمر واستبدال giveacodicetagpre.

مع هذه الكتلة: giveacodicetagpre.

والتي ستجعلها متوافقة مع الإصدارات القديمة من Arduino. (بفضل هذا الموقع لهذا الغرف!)

ثم فقط حرق Demokit-20 من كراسة الرسم في القائمة المنسدلة في IDE. فقط تحميل البرامج الثابتة على متنها. حظا سعيدا.

تحرير: لذلك قمت بتحميل رمز Android على هاتفي (حاول في العديد من الأجهزة) وحصلت على البرامج الثابتة المحروقة على ADK، ولكن الآن لا يمكنني الحصول على الهاتف / الجهاز للتعرف على ADK. جرب هذه الإجابة على مسؤوليتك الخاصة. في الوقت الحالي، سأحاول التخفيض.

Edit2: downgrading إلى 0022 عملت. الصيد السعيد.