Android ADK용 Demokit.pde를 컴파일할 수 없습니다.
https://stackoverflow.com//questions/10667492
italiano
english
français
española
中国
日本の
العربية
Deutsch
한국어
Português
Russian문제
호스트 쉴드가 있는 Arduino Mega 2560 보드로 Android ADK를 테스트하기 시작했습니다.Android 문서에서 제공한 대로 aruduino IDE에 Demokit.pde를 얻었습니다.하지만 Arduino 보드에 업로드하기 위해 Demokit.pde를 컴파일할 수 없습니다.누구든지 조언을 도와줄 수 있나요?
미리 감사드립니다
Arduino IDE에 표시되는 오류 메시지:
In file included from demokit.cpp:1:
/usr/share/arduino/libraries/Wire/Wire.h:23:22: error: /usr/share/arduino/libraries/USB_Host_Shield/inttypes.h: Permission denied
demokit.cpp:4:22: error: /usr/share/arduino/libraries/USB_Host_Shield/Max3421e.h: Permission denied
demokit.cpp:5:17: error: /usr/share/arduino/libraries/USB_Host_Shield/Usb.h: Permission denied
demokit.cpp:6:30: error: /usr/share/arduino/libraries/USB_Host_Shield/AndroidAccessory.h: Permission denied
demokit.cpp:8:22: error: /usr/share/arduino/libraries/USB_Host_Shield/CapSense.h: Permission denied
In file included from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:4:20: error: /usr/share/arduino/libraries/USB_Host_Shield/stdlib.h: Permission denied
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:5:20: error: /usr/share/arduino/libraries/USB_Host_Shield/string.h: Permission denied
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:6:18: error: /usr/share/arduino/libraries/USB_Host_Shield/math.h: Permission denied
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:8:27: error: /usr/share/arduino/libraries/USB_Host_Shield/avr/interrupt.h: Permission denied
In file included from /usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:10,
from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:28:20: error: /usr/share/arduino/libraries/USB_Host_Shield/avr/io.h: Permission denied
In file included from /usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:13,
from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:23:19: error: /usr/share/arduino/libraries/USB_Host_Shield/ctype.h: Permission denied
In file included from /usr/share/arduino/hardware/arduino/cores/arduino/Stream.h:24,
from /usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:27,
from /usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:15,
from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h:24:33: error: /usr/share/arduino/libraries/USB_Host_Shield/stdio.h: Permission denied
In file included from demokit.cpp:1:
/usr/share/arduino/libraries/Wire/Wire.h:30: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:31: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:32: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:34: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:35: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:36: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:37: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:39: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:43: error: ‘uint8_t’ has not been declared
/usr/share/arduino/libraries/Wire/Wire.h:47: error: ‘uint8_t’ has not been declared
/usr/share/arduino/libraries/Wire/Wire.h:48: error: ‘void TwoWire::begin(int)’ cannot be overloaded
/usr/share/arduino/libraries/Wire/Wire.h:47: error: with ‘void TwoWire::begin(int)’
/usr/share/arduino/libraries/Wire/Wire.h:49: error: ‘uint8_t’ has not been declared
/usr/share/arduino/libraries/Wire/Wire.h:50: error: ‘void TwoWire::beginTransmission(int)’ cannot be overloaded
/usr/share/arduino/libraries/Wire/Wire.h:49: error: with ‘void TwoWire::beginTransmission(int)’
/usr/share/arduino/libraries/Wire/Wire.h:51: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:52: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:53: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:54: error: ‘uint8_t’ has not been declared
/usr/share/arduino/libraries/Wire/Wire.h:55: error: ‘uint8_t’ has not been declared
/usr/share/arduino/libraries/Wire/Wire.h:55: error: ‘uint8_t’ has not been declared
/usr/share/arduino/libraries/Wire/Wire.h:56: error: ‘void TwoWire::send(int)’ cannot be overloaded
/usr/share/arduino/libraries/Wire/Wire.h:54: error: with ‘void TwoWire::send(int)’
/usr/share/arduino/libraries/Wire/Wire.h:58: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Wire/Wire.h:59: error: ‘uint8_t’ does not name a type
In file included from demokit.cpp:2:
/usr/share/arduino/libraries/Servo/Servo.h:100: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Servo/Servo.h:101: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Servo/Servo.h:113: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Servo/Servo.h:114: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Servo/Servo.h:122: error: ‘uint8_t’ does not name a type
/usr/share/arduino/libraries/Servo/Servo.h:123: error: ‘int8_t’ does not name a type
/usr/share/arduino/libraries/Servo/Servo.h:124: error: ‘int8_t’ does not name a type
In file included from /usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:10,
from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:104: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:105: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:109: error: variable or field ‘pinMode’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:109: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:109: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:110: error: variable or field ‘digitalWrite’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:110: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:110: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:111: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:112: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:113: error: variable or field ‘analogReference’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:113: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:114: error: variable or field ‘analogWrite’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:114: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:114: error: expected primary-expression before ‘int’
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:120: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:120: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:120: error: expected primary-expression before ‘unsigned’
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:120: error: initializer expression list treated as compound expression
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:122: error: variable or field ‘shiftOut’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:122: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:122: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:122: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:122: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:123: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:125: error: variable or field ‘attachInterrupt’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:125: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:125: error: expected primary-expression before ‘void’
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:125: error: expected primary-expression before ‘int’
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:126: error: variable or field ‘detachInterrupt’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:126: error: ‘uint8_t’ was not declared in this scope
In file included from /usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:13,
from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:26: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:27: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:28: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:29: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:30: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:31: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:32: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:33: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:34: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:35: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:36: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:37: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:38: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:46: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:54: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:62: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:69: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:76: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:83: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:90: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:97: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:104: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:112: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:121: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:128: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:136: error: ‘boolean’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h: In function ‘int toAscii(int)’:
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:146: error: ‘toascii’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h: In function ‘int toLowerCase(int)’:
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:158: error: ‘tolower’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h: In function ‘int toUpperCase(int)’:
/usr/share/arduino/hardware/arduino/cores/arduino/WCharacter.h:165: error: ‘toupper’ was not declared in this scope
In file included from /usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:14,
from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/WString.h: In destructor ‘String::~String()’:
/usr/share/arduino/hardware/arduino/cores/arduino/WString.h:40: error: ‘free’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/WString.h: In member function ‘void String::getBuffer(unsigned int)’:
/usr/share/arduino/hardware/arduino/cores/arduino/WString.h:102: error: ‘malloc’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/WString.h:103: error: ‘NULL’ was not declared in this scope
In file included from /usr/share/arduino/hardware/arduino/cores/arduino/Stream.h:24,
from /usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:27,
from /usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:15,
from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h: At global scope:
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h:37: error: ‘uint8_t’ has not been declared
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h:38: error: ‘uint8_t’ has not been declared
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h:40: error: ‘uint8_t’ has not been declared
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h:42: error: expected ‘,’ or ‘...’ before ‘*’ token
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h:42: error: ISO C++ forbids declaration of ‘uint8_t’ with no type
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h:42: error: ‘virtual void Print::write(int)’ cannot be overloaded
/usr/share/arduino/hardware/arduino/cores/arduino/Print.h:40: error: with ‘virtual void Print::write(int)’
In file included from /usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:15,
from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:35: error: ISO C++ forbids declaration of ‘uint8_t’ with no type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:35: error: expected ‘;’ before ‘*’ token
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:36: error: ISO C++ forbids declaration of ‘uint8_t’ with no type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:36: error: expected ‘;’ before ‘*’ token
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:37: error: ISO C++ forbids declaration of ‘uint8_t’ with no type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:37: error: expected ‘;’ before ‘*’ token
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:38: error: ISO C++ forbids declaration of ‘uint8_t’ with no type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:38: error: expected ‘;’ before ‘*’ token
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:39: error: ISO C++ forbids declaration of ‘uint8_t’ with no type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:39: error: expected ‘;’ before ‘*’ token
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:40: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:41: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:42: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:43: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:44: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:47: error: expected ‘,’ or ‘...’ before ‘*’ token
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:50: error: ISO C++ forbids declaration of ‘uint8_t’ with no type
/usr/share/arduino/hardware/arduino/cores/arduino/HardwareSerial.h:57: error: ‘uint8_t’ has not been declared
In file included from demokit.cpp:43:
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:17: error: ‘uint16_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:18: error: ‘uint16_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:22: error: redefinition of ‘long unsigned int pulseIn’
/usr/share/arduino/hardware/arduino/cores/arduino/wiring.h:120: error: ‘long unsigned int pulseIn’ previously defined here
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:22: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:22: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:22: error: expected primary-expression before ‘unsigned’
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:24: error: variable or field ‘tone’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:24: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:24: error: expected primary-expression before ‘unsigned’
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:24: error: expected primary-expression before ‘unsigned’
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:25: error: variable or field ‘noTone’ declared void
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:25: error: ‘uint8_t’ was not declared in this scope
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:34: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:35: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:36: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:37: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:38: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:39: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:40: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:41: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:42: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:43: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:44: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:45: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:46: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:47: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:48: error: ‘uint8_t’ does not name a type
/usr/share/arduino/hardware/arduino/cores/arduino/WProgram.h:49: error: ‘uint8_t’ does not name a type
demokit:42: error: ‘AndroidAccessory’ does not name a type
demokit:51: error: ‘CapSense’ does not name a type
demokit.cpp: In function ‘void init_buttons()’:
demokit:58: error: ‘A6’ was not declared in this scope
demokit:58: error: ‘pinMode’ was not declared in this scope
demokit:59: error: ‘A7’ was not declared in this scope
demokit:60: error: ‘A8’ was not declared in this scope
demokit:61: error: ‘A9’ was not declared in this scope
demokit:64: error: ‘digitalWrite’ was not declared in this scope
demokit.cpp: In function ‘void init_relays()’:
demokit:73: error: ‘A0’ was not declared in this scope
demokit:73: error: ‘pinMode’ was not declared in this scope
demokit:74: error: ‘A1’ was not declared in this scope
demokit.cpp: In function ‘void init_leds()’:
demokit:80: error: ‘digitalWrite’ was not declared in this scope
demokit:84: error: ‘pinMode’ was not declared in this scope
demokit.cpp: At global scope:
demokit:107: error: ‘byte’ does not name a type
demokit.cpp: In function ‘void setup()’:
demokit:110: error: ‘Serial’ was not declared in this scope
demokit:119: error: ‘touch_robot’ was not declared in this scope
demokit:121: error: ‘class Servo’ has no member named ‘attach’
demokit:123: error: ‘class Servo’ has no member named ‘attach’
demokit:125: error: ‘class Servo’ has no member named ‘attach’
demokit:129: error: ‘b1’ was not declared in this scope
demokit:129: error: ‘A6’ was not declared in this scope
demokit:129: error: ‘digitalRead’ cannot be used as a function
demokit:130: error: ‘b2’ was not declared in this scope
demokit:130: error: ‘A7’ was not declared in this scope
demokit:130: error: ‘digitalRead’ cannot be used as a function
demokit:131: error: ‘b3’ was not declared in this scope
demokit:131: error: ‘A8’ was not declared in this scope
demokit:131: error: ‘digitalRead’ cannot be used as a function
demokit:132: error: ‘b4’ was not declared in this scope
demokit:132: error: ‘A9’ was not declared in this scope
demokit:132: error: ‘digitalRead’ cannot be used as a function
demokit:133: error: ‘c’ was not declared in this scope
demokit:135: error: ‘acc’ was not declared in this scope
demokit.cpp: In function ‘void loop()’:
demokit:140: error: ‘byte’ was not declared in this scope
demokit:140: error: expected `;' before ‘err’
demokit:141: error: expected `;' before ‘idle’
demokit:142: error: ‘byte’ does not name a type
demokit:143: error: expected `;' before ‘msg’
demokit:146: error: ‘acc’ was not declared in this scope
demokit:147: error: ‘msg’ was not declared in this scope
demokit:149: error: expected `;' before ‘b’
demokit:150: error: ‘uint16_t’ was not declared in this scope
demokit:150: error: expected `;' before ‘val’
demokit:158: error: ‘analogWrite’ was not declared in this scope
demokit:160: error: ‘analogWrite’ was not declared in this scope
demokit:162: error: ‘analogWrite’ was not declared in this scope
demokit:164: error: ‘analogWrite’ was not declared in this scope
demokit:166: error: ‘analogWrite’ was not declared in this scope
demokit:168: error: ‘analogWrite’ was not declared in this scope
demokit:170: error: ‘analogWrite’ was not declared in this scope
demokit:172: error: ‘analogWrite’ was not declared in this scope
demokit:174: error: ‘analogWrite’ was not declared in this scope
demokit:183: error: ‘A0’ was not declared in this scope
demokit:183: error: ‘digitalWrite’ was not declared in this scope
demokit:185: error: ‘A1’ was not declared in this scope
demokit:185: error: ‘digitalWrite’ was not declared in this scope
demokit:191: error: ‘b’ was not declared in this scope
demokit:191: error: ‘A6’ was not declared in this scope
demokit:191: error: ‘digitalRead’ cannot be used as a function
demokit:192: error: ‘b1’ was not declared in this scope
demokit:199: error: ‘A7’ was not declared in this scope
demokit:199: error: ‘digitalRead’ cannot be used as a function
demokit:200: error: ‘b2’ was not declared in this scope
demokit:207: error: ‘A8’ was not declared in this scope
demokit:207: error: ‘digitalRead’ cannot be used as a function
demokit:208: error: ‘b3’ was not declared in this scope
demokit:215: error: ‘A9’ was not declared in this scope
demokit:215: error: ‘digitalRead’ cannot be used as a function
demokit:216: error: ‘b4’ was not declared in this scope
demokit:223: error: ‘count’ was not declared in this scope
demokit:225: error: ‘val’ was not declared in this scope
demokit:225: error: ‘A3’ was not declared in this scope
demokit:225: error: ‘analogRead’ cannot be used as a function
demokit:233: error: ‘A2’ was not declared in this scope
demokit:233: error: ‘analogRead’ cannot be used as a function
demokit:249: error: ‘touch_robot’ was not declared in this scope
demokit:253: error: ‘c’ was not declared in this scope
demokit:265: error: ‘analogWrite’ was not declared in this scope
demokit:277: error: ‘A0’ was not declared in this scope
demokit:277: error: ‘digitalWrite’ was not declared in this scope
demokit:278: error: ‘A1’ was not declared in this scope
demokit.cpp: In function ‘void init_joystick(int)’:
demokit:288: error: ‘byte’ was not declared in this scope
demokit:288: error: expected `;' before ‘status’
demokit:290: error: ‘A9’ was not declared in this scope
demokit:290: error: ‘pinMode’ was not declared in this scope
demokit:291: error: ‘digitalWrite’ was not declared in this scope
demokit:293: error: ‘A10’ was not declared in this scope
demokit:296: error: ‘A11’ was not declared in this scope
demokit:307: error: ‘status’ was not declared in this scope
demokit:308: error: ‘status’ was not declared in this scope
demokit.cpp: In function ‘char joystick_interrupt()’:
demokit:365: error: ‘A10’ was not declared in this scope
demokit:365: error: ‘digitalRead’ cannot be used as a function
demokit.cpp: In function ‘char read_joy_reg(char)’:
demokit:376: error: ‘class TwoWire’ has no member named ‘write’
demokit:377: error: ‘class TwoWire’ has no member named ‘endTransmission’
demokit:379: error: ‘class TwoWire’ has no member named ‘requestFrom’
demokit:381: error: ‘class TwoWire’ has no member named ‘available’
demokit:382: error: ‘class TwoWire’ has no member named ‘read’
demokit.cpp: In function ‘void write_joy_reg(char, char)’:
demokit:390: error: ‘class TwoWire’ has no member named ‘write’
demokit:391: error: ‘class TwoWire’ has no member named ‘write’
demokit:392: error: ‘class TwoWire’ has no member named ‘endTransmission’
해결책
나는 비슷한 문제가 있었다 Arduino 1.0, 이전 버전을 사용해도 문제가 동일하다면 다음과 같이 말하세요. Arduino 0023 그것을 고쳐야합니다.여기에서 다운로드할 수 있습니다: http://arduino.cc/en/Main/Software
다른 팁
하시면 다운 그레이드를하거나 몇 가지 사항을 수정할 수 있습니다. Mine 교수는 이 저장소를 찾았습니다. ~ / Libraries 폴더의 이전 디렉토리에있는 모든 파일을 모두 복사하십시오. 모든 라이브러리가 ~ / SketchBook / Libraries에 있는지 확인한 다음 IDE (버전 1.0!)를 다시 시작하십시오. 파일 -> SketchBook-> Libraries-> usb_host_shield-> ADK-> DemoKIT-20. 로 이동하십시오.
이전 버전의 Arduino와 역 호환됩니다. ( 해당 팁!) 사이트 덕분에!)
그런 다음 IDE의 파일 드롭 다운에서 SketchBook에서 DemoKIT-20을 굽습니다. 방금 보드에 펌웨어를로드했습니다. 행운을 빈다.
편집 : 그래서 내 전화기에 Android 코드를로드하고 (여러 장치에서 시도) 펌웨어를 ADK로 구운 펌웨어를 가져 왔지만 이제는 전화 / 장치가 ADK를 인식 할 수 없습니다. 이 답변을 자신의 위험에 시도하십시오. 지금은 다운 그레이드를 시도 할 것입니다.
edit2 : 0022로 다운 그레이드가 작동했습니다. 행복한 사냥.
제휴하지 않습니다 StackOverflow
