لماذا لا العددية::Util::رقمية تثبيت بشكل صحيح ؟
سؤال
آسف إذا كان هذا كل شيء يعمل معا ؛ يبدو خط فواصل لا تظهر في نافذة المعاينة.حصلت على هذا الإخراج عند تشغيل sudo cpan Scalar::Util::Numeric
;thx جوش.
jmm@freekbox:~/bfwsandbox/sa/angel/astroportal/dtu8e/resources$ sudo cpan Scalar::Util::Numeric [sudo] password for jmm: CPAN: Storable loaded ok Going to read /home/jmm/.cpan/Metadata Database was generated on Tue, 09 Sep 2008 16:02:51 GMT CPAN: LWP::UserAgent loaded ok Fetching with LWP: ftp://ftp.perl.org/pub/CPAN/authors/01mailrc.txt.gz Going to read /home/jmm/.cpan/sources/authors/01mailrc.txt.gz Fetching with LWP: ftp://ftp.perl.org/pub/CPAN/modules/02packages.details.txt.gz Going to read /home/jmm/.cpan/sources/modules/02packages.details.txt.gz Database was generated on Tue, 16 Sep 2008 16:02:50 GMT There's a new CPAN.pm version (v1.9205) available! [Current version is v1.7602] You might want to try install Bundle::CPAN reload cpan without quitting the current session. It should be a seamless upgrade while we are running... Fetching with LWP: ftp://ftp.perl.org/pub/CPAN/modules/03modlist.data.gz Going to read /home/jmm/.cpan/sources/modules/03modlist.data.gz Going to write /home/jmm/.cpan/Metadata Running install for module Scalar::Util::Numeric Running make for C/CH/CHOCOLATE/Scalar-Util-Numeric-0.02.tar.gz CPAN: Digest::MD5 loaded ok Checksum for /home/jmm/.cpan/sources/authors/id/C/CH/CHOCOLATE/Scalar-Util-Numeric-0.02.tar.gz ok Scanning cache /home/jmm/.cpan/build for sizes Scalar-Util-Numeric-0.02/ Scalar-Util-Numeric-0.02/Changes Scalar-Util-Numeric-0.02/lib/ Scalar-Util-Numeric-0.02/lib/Scalar/ Scalar-Util-Numeric-0.02/lib/Scalar/Util/ Scalar-Util-Numeric-0.02/lib/Scalar/Util/Numeric.pm Scalar-Util-Numeric-0.02/Makefile.PL Scalar-Util-Numeric-0.02/MANIFEST Scalar-Util-Numeric-0.02/META.yml Scalar-Util-Numeric-0.02/Numeric.xs Scalar-Util-Numeric-0.02/ppport.h Scalar-Util-Numeric-0.02/README Scalar-Util-Numeric-0.02/t/ Scalar-Util-Numeric-0.02/t/pod.t Scalar-Util-Numeric-0.02/t/Scalar-Util-Numeric.t Removing previously used /home/jmm/.cpan/build/Scalar-Util-Numeric-0.02 CPAN.pm: Going to build C/CH/CHOCOLATE/Scalar-Util-Numeric-0.02.tar.gz Checking if your kit is complete... Looks good Writing Makefile for Scalar::Util::Numeric cp lib/Scalar/Util/Numeric.pm blib/lib/Scalar/Util/Numeric.pm AutoSplitting blib/lib/Scalar/Util/Numeric.pm (blib/lib/auto/Scalar/Util/Numeric) /usr/bin/perl /usr/share/perl/5.8/ExtUtils/xsubpp -typemap /usr/share/perl/5.8/ExtUtils/typemap Numeric.xs > Numeric.xsc && mv Numeric.xsc Numeric.c cc -c -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -DVERSION=\"0.02\" -DXS_VERSION=\"0.02\" -fPIC "-I/usr/lib/perl/5.8/CORE" Numeric.c In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:420:24: error: sys/types.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:451:19: error: ctype.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:463:23: error: locale.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:480:20: error: setjmp.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:486:26: error: sys/param.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:491:23: error: stdlib.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:496:23: error: unistd.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:776:23: error: string.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:925:27: error: netinet/in.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:929:26: error: arpa/inet.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:939:25: error: sys/stat.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:961:21: error: time.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:968:25: error: sys/time.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:975:27: error: sys/times.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:982:19: error: errno.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:997:25: error: sys/socket.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:1024:21: error: netdb.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:1127:24: error: sys/ioctl.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:1156:23: error: dirent.h: No such file or directory In file included from /usr/lib/gcc/i486-linux-gnu/4.2.3/include/syslimits.h:7, from /usr/lib/gcc/i486-linux-gnu/4.2.3/include/limits.h:11, from /usr/lib/perl/5.8/CORE/perl.h:1510, from Numeric.xs:2: /usr/lib/gcc/i486-linux-gnu/4.2.3/include/limits.h:122:61: error: limits.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/perl.h:2120, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/handy.h:136:25: error: inttypes.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/perl.h:2284, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/unixish.h:106:21: error: signal.h: No such file or directory In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:2421:33: error: pthread.h: No such file or directory In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:2423: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘perl_os_thread’ /usr/lib/perl/5.8/CORE/perl.h:2424: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘perl_mutex’ /usr/lib/perl/5.8/CORE/perl.h:2425: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘perl_cond’ /usr/lib/perl/5.8/CORE/perl.h:2426: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘perl_key’ In file included from /usr/lib/perl/5.8/CORE/iperlsys.h:51, from /usr/lib/perl/5.8/CORE/perl.h:2733, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perlio.h:65:19: error: stdio.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/iperlsys.h:51, from /usr/lib/perl/5.8/CORE/perl.h:2733, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perlio.h:259: error: expected ‘)’ before ‘*’ token /usr/lib/perl/5.8/CORE/perlio.h:262: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/perlio.h:265: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/perlio.h:268: error: expected declaration specifiers or ‘...’ before ‘FILE’ In file included from /usr/lib/perl/5.8/CORE/perl.h:2747, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/sv.h:389: error: expected specifier-qualifier-list before ‘DIR’ In file included from /usr/lib/perl/5.8/CORE/op.h:497, from /usr/lib/perl/5.8/CORE/perl.h:2754, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/reentr.h:72:20: error: pwd.h: No such file or directory /usr/lib/perl/5.8/CORE/reentr.h:75:20: error: grp.h: No such file or directory /usr/lib/perl/5.8/CORE/reentr.h:85:26: error: crypt.h: No such file or directory /usr/lib/perl/5.8/CORE/reentr.h:90:27: error: shadow.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/op.h:497, from /usr/lib/perl/5.8/CORE/perl.h:2754, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/reentr.h:612: error: field ‘_crypt_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:620: error: field ‘_drand48_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:624: error: field ‘_grent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:635: error: field ‘_hostent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:654: error: field ‘_netent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:669: error: field ‘_protoent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:684: error: field ‘_pwent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:695: error: field ‘_servent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:710: error: field ‘_spent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:721: error: field ‘_gmtime_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:724: error: field ‘_localtime_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:771: error: field ‘_random_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:772: error: expected specifier-qualifier-list before ‘int32_t’ In file included from /usr/lib/perl/5.8/CORE/perl.h:2756, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/av.h:13: error: expected specifier-qualifier-list before ‘ssize_t’ In file included from /usr/lib/perl/5.8/CORE/perl.h:2759, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/scope.h:232: error: expected specifier-qualifier-list before ‘sigjmp_buf’ In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:2931: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘getuid’ /usr/lib/perl/5.8/CORE/perl.h:2932: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘geteuid’ /usr/lib/perl/5.8/CORE/perl.h:2933: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘getgid’ /usr/lib/perl/5.8/CORE/perl.h:2934: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘getegid’ In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:3238:22: error: math.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/perl.h:3881, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/thrdvar.h:85: error: field ‘Tstatbuf’ has incomplete type /usr/lib/perl/5.8/CORE/thrdvar.h:86: error: field ‘Tstatcache’ has incomplete type /usr/lib/perl/5.8/CORE/thrdvar.h:91: error: field ‘Ttimesbuf’ has incomplete type In file included from /usr/lib/perl/5.8/CORE/perl.h:3883, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/intrpvar.h:66: error: expected specifier-qualifier-list before ‘time_t’ In file included from /usr/lib/perl/5.8/CORE/perl.h:3950, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/proto.h:128: error: expected declaration specifiers or ‘...’ before ‘mode_t’ /usr/lib/perl/5.8/CORE/proto.h:128: error: expected declaration specifiers or ‘...’ before ‘uid_t’ /usr/lib/perl/5.8/CORE/proto.h:297: error: expected declaration specifiers or ‘...’ before ‘off64_t’ /usr/lib/perl/5.8/CORE/proto.h:299: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_do_sysseek’ /usr/lib/perl/5.8/CORE/proto.h:300: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_do_tell’ /usr/lib/perl/5.8/CORE/proto.h:411: error: expected declaration specifiers or ‘...’ before ‘gid_t’ /usr/lib/perl/5.8/CORE/proto.h:411: error: expected declaration specifiers or ‘...’ before ‘uid_t’ /usr/lib/perl/5.8/CORE/proto.h:736: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_my_fork’ /usr/lib/perl/5.8/CORE/proto.h:1020: error: expected declaration specifiers or ‘...’ before ‘pid_t’ /usr/lib/perl/5.8/CORE/proto.h:1300: error: expected declaration specifiers or ‘...’ before ‘pid_t’ /usr/lib/perl/5.8/CORE/proto.h:1456: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/proto.h:2001: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_PerlIO_read’ /usr/lib/perl/5.8/CORE/proto.h:2002: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_PerlIO_write’ /usr/lib/perl/5.8/CORE/proto.h:2003: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_PerlIO_unread’ /usr/lib/perl/5.8/CORE/proto.h:2004: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_PerlIO_tell’ /usr/lib/perl/5.8/CORE/proto.h:2005: error: expected declaration specifiers or ‘...’ before ‘off64_t’ In file included from /usr/lib/perl/5.8/CORE/perl.h:3988, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perlvars.h:31: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘PL_thr_key’ /usr/lib/perl/5.8/CORE/perlvars.h:48: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘PL_op_mutex’ /usr/lib/perl/5.8/CORE/perlvars.h:52: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘PL_dollarzero_mutex’ /usr/lib/perl/5.8/CORE/perl.h:4485:24: error: sys/ipc.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:4486:24: error: sys/sem.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:4611:24: error: sys/file.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/perlapi.h:38, from /usr/lib/perl/5.8/CORE/XSUB.h:349, from Numeric.xs:3: /usr/lib/perl/5.8/CORE/intrpvar.h:66: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/intrpvar.h:237: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/intrpvar.h:238: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/intrpvar.h:239: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/intrpvar.h:240: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token In file included from /usr/lib/perl/5.8/CORE/perlapi.h:39, from /usr/lib/perl/5.8/CORE/XSUB.h:349, from Numeric.xs:3: /usr/lib/perl/5.8/CORE/perlvars.h:31: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/perlvars.h:48: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/perlvars.h:52: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token In file included from Numeric.xs:4: ppport.h:3042:1: warning: "PERL_UNUSED_DECL" redefined In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:163:1: warning: this is the location of the previous definition Numeric.c: In function ‘XS_Scalar__Util__Numeric_is_num’: Numeric.c:20: error: invalid type argument of ‘unary *’ Numeric.c:20: error: invalid type argument of ‘unary *’ Numeric.c:20: error: invalid type argument of ‘unary *’ Numeric.c:22: error: invalid type argument of ‘unary *’ Numeric.c:24: error: invalid type argument of ‘unary *’ Numeric.xs:16: error: invalid type argument of ‘unary *’ Numeric.xs:17: error: invalid type argument of ‘unary *’ Numeric.xs:20: error: invalid type argument of ‘unary *’ Numeric.xs:20: error: invalid type argument of ‘unary *’ Numeric.xs:20: error: invalid type argument of ‘unary *’ Numeric.xs:20: error: invalid type argument of ‘unary *’ Numeric.xs:20: error: invalid type argument of ‘unary *’ Numeric.c:36: error: invalid type argument of ‘unary *’ Numeric.c:36: error: invalid type argument of ‘unary *’ Numeric.c: In function ‘XS_Scalar__Util__Numeric_uvmax’: Numeric.c:43: error: invalid type argument of ‘unary *’ Numeric.c:43: error: invalid type argument of ‘unary *’ Numeric.c:43: error: invalid type argument of ‘unary *’ Numeric.c:45: error: invalid type argument of ‘unary *’ Numeric.xs:26: error: invalid type argument of ‘unary *’ Numeric.xs:26: error: invalid type argument of ‘unary *’ Numeric.xs:26: error: invalid type argument of ‘unary *’ Numeric.xs:26: error: invalid type argument of ‘unary *’ Numeric.xs:26: error: invalid type argument of ‘unary *’ Numeric.c:51: error: invalid type argument of ‘unary *’ Numeric.c:51: error: invalid type argument of ‘unary *’ Numeric.c: In function ‘boot_Scalar__Util__Numeric’: Numeric.c:60: error: invalid type argument of ‘unary *’ Numeric.c:60: error: invalid type argument of ‘unary *’ Numeric.c:60: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:65: error: invalid type argument of ‘unary *’ Numeric.c:65: error: invalid type argument of ‘unary *’ Numeric.c:66: error: invalid type argument of ‘unary *’ Numeric.c:66: error: invalid type argument of ‘unary *’ Numeric.c:67: error: invalid type argument of ‘unary *’ Numeric.c:67: error: invalid type argument of ‘unary *’ Numeric.c:67: error: invalid type argument of ‘unary *’ Numeric.c:67: error: invalid type argument of ‘unary *’ make: *** [Numeric.o] Error 1 /usr/bin/make -- NOT OK Running make test Can't test without successful make Running make install make had returned bad status, install seems impossible jmm@freekbox:~/bfwsandbox/sa/angel/astroportal/dtu8e/resources$
المحلول
كنت في عداد المفقودين الخاص بك C مكتبة التنمية رؤوس.يجب تثبيت حزمة لهم.هذه هي اللازمة لتثبيت هذه الوحدة لأنه يحتوي على ترجمة بعض غير بيرل ج رمز يحتاج إلى معرفة المزيد حول النظام الخاص بك.
لا أستطيع أن أقول ما هو نظام التشغيل الذي أنت عليه, لكن يبدو لينكس.إذا كان ديبيان ، يجب أن تكون قادرا على استخدام الرابطة بين الحصول على تثبيت 'libc6-dev حزمة'.التي سوف تحتوي على رؤوس تحتاج إلى ترجمة هذه الوحدة.على أنواع أخرى من لينكس سيكون هناك وبالمثل اسمه الحزمة.
نصائح أخرى
فإنه لا يمكن العثور على النظام الأساسي رؤوس.إما تشمل مسار خطير عابث ، أو رؤوس لم يتم تثبيت.
من الصعب أن تقرأ بدون فواصل الأسطر ، ولكن يبدو أن كنت في عداد المفقودين sys/types.h
على النظام الخاص بك.هل لديك كامل بناء بيئة تثبيت (دول مجلس التعاون الخليجي, جعل, الخ) ؟ ما هو نظام التشغيل والتوزيع تستخدمه ؟
في المستقبل, يجب أن bockquote إخراج مثل هذا (حدد النص وانقر على زر "اقتباس").