Warum Skalar ist nicht :: Util :: Numerische Installation korrekt?
Frage
Sorry, wenn dies alles zusammen läuft; es sieht aus wie die Zeilenumbrüche im Vorschaufenster nicht zeigen sich. Ich habe diese Ausgabe, wenn sudo cpan Scalar::Util::Numeric
läuft; thx, Josh.
jmm@freekbox:~/bfwsandbox/sa/angel/astroportal/dtu8e/resources$ sudo cpan Scalar::Util::Numeric [sudo] password for jmm: CPAN: Storable loaded ok Going to read /home/jmm/.cpan/Metadata Database was generated on Tue, 09 Sep 2008 16:02:51 GMT CPAN: LWP::UserAgent loaded ok Fetching with LWP: ftp://ftp.perl.org/pub/CPAN/authors/01mailrc.txt.gz Going to read /home/jmm/.cpan/sources/authors/01mailrc.txt.gz Fetching with LWP: ftp://ftp.perl.org/pub/CPAN/modules/02packages.details.txt.gz Going to read /home/jmm/.cpan/sources/modules/02packages.details.txt.gz Database was generated on Tue, 16 Sep 2008 16:02:50 GMT There's a new CPAN.pm version (v1.9205) available! [Current version is v1.7602] You might want to try install Bundle::CPAN reload cpan without quitting the current session. It should be a seamless upgrade while we are running... Fetching with LWP: ftp://ftp.perl.org/pub/CPAN/modules/03modlist.data.gz Going to read /home/jmm/.cpan/sources/modules/03modlist.data.gz Going to write /home/jmm/.cpan/Metadata Running install for module Scalar::Util::Numeric Running make for C/CH/CHOCOLATE/Scalar-Util-Numeric-0.02.tar.gz CPAN: Digest::MD5 loaded ok Checksum for /home/jmm/.cpan/sources/authors/id/C/CH/CHOCOLATE/Scalar-Util-Numeric-0.02.tar.gz ok Scanning cache /home/jmm/.cpan/build for sizes Scalar-Util-Numeric-0.02/ Scalar-Util-Numeric-0.02/Changes Scalar-Util-Numeric-0.02/lib/ Scalar-Util-Numeric-0.02/lib/Scalar/ Scalar-Util-Numeric-0.02/lib/Scalar/Util/ Scalar-Util-Numeric-0.02/lib/Scalar/Util/Numeric.pm Scalar-Util-Numeric-0.02/Makefile.PL Scalar-Util-Numeric-0.02/MANIFEST Scalar-Util-Numeric-0.02/META.yml Scalar-Util-Numeric-0.02/Numeric.xs Scalar-Util-Numeric-0.02/ppport.h Scalar-Util-Numeric-0.02/README Scalar-Util-Numeric-0.02/t/ Scalar-Util-Numeric-0.02/t/pod.t Scalar-Util-Numeric-0.02/t/Scalar-Util-Numeric.t Removing previously used /home/jmm/.cpan/build/Scalar-Util-Numeric-0.02 CPAN.pm: Going to build C/CH/CHOCOLATE/Scalar-Util-Numeric-0.02.tar.gz Checking if your kit is complete... Looks good Writing Makefile for Scalar::Util::Numeric cp lib/Scalar/Util/Numeric.pm blib/lib/Scalar/Util/Numeric.pm AutoSplitting blib/lib/Scalar/Util/Numeric.pm (blib/lib/auto/Scalar/Util/Numeric) /usr/bin/perl /usr/share/perl/5.8/ExtUtils/xsubpp -typemap /usr/share/perl/5.8/ExtUtils/typemap Numeric.xs > Numeric.xsc && mv Numeric.xsc Numeric.c cc -c -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -DVERSION=\"0.02\" -DXS_VERSION=\"0.02\" -fPIC "-I/usr/lib/perl/5.8/CORE" Numeric.c In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:420:24: error: sys/types.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:451:19: error: ctype.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:463:23: error: locale.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:480:20: error: setjmp.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:486:26: error: sys/param.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:491:23: error: stdlib.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:496:23: error: unistd.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:776:23: error: string.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:925:27: error: netinet/in.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:929:26: error: arpa/inet.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:939:25: error: sys/stat.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:961:21: error: time.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:968:25: error: sys/time.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:975:27: error: sys/times.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:982:19: error: errno.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:997:25: error: sys/socket.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:1024:21: error: netdb.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:1127:24: error: sys/ioctl.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:1156:23: error: dirent.h: No such file or directory In file included from /usr/lib/gcc/i486-linux-gnu/4.2.3/include/syslimits.h:7, from /usr/lib/gcc/i486-linux-gnu/4.2.3/include/limits.h:11, from /usr/lib/perl/5.8/CORE/perl.h:1510, from Numeric.xs:2: /usr/lib/gcc/i486-linux-gnu/4.2.3/include/limits.h:122:61: error: limits.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/perl.h:2120, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/handy.h:136:25: error: inttypes.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/perl.h:2284, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/unixish.h:106:21: error: signal.h: No such file or directory In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:2421:33: error: pthread.h: No such file or directory In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:2423: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘perl_os_thread’ /usr/lib/perl/5.8/CORE/perl.h:2424: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘perl_mutex’ /usr/lib/perl/5.8/CORE/perl.h:2425: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘perl_cond’ /usr/lib/perl/5.8/CORE/perl.h:2426: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘perl_key’ In file included from /usr/lib/perl/5.8/CORE/iperlsys.h:51, from /usr/lib/perl/5.8/CORE/perl.h:2733, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perlio.h:65:19: error: stdio.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/iperlsys.h:51, from /usr/lib/perl/5.8/CORE/perl.h:2733, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perlio.h:259: error: expected ‘)’ before ‘*’ token /usr/lib/perl/5.8/CORE/perlio.h:262: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/perlio.h:265: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/perlio.h:268: error: expected declaration specifiers or ‘...’ before ‘FILE’ In file included from /usr/lib/perl/5.8/CORE/perl.h:2747, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/sv.h:389: error: expected specifier-qualifier-list before ‘DIR’ In file included from /usr/lib/perl/5.8/CORE/op.h:497, from /usr/lib/perl/5.8/CORE/perl.h:2754, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/reentr.h:72:20: error: pwd.h: No such file or directory /usr/lib/perl/5.8/CORE/reentr.h:75:20: error: grp.h: No such file or directory /usr/lib/perl/5.8/CORE/reentr.h:85:26: error: crypt.h: No such file or directory /usr/lib/perl/5.8/CORE/reentr.h:90:27: error: shadow.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/op.h:497, from /usr/lib/perl/5.8/CORE/perl.h:2754, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/reentr.h:612: error: field ‘_crypt_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:620: error: field ‘_drand48_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:624: error: field ‘_grent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:635: error: field ‘_hostent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:654: error: field ‘_netent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:669: error: field ‘_protoent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:684: error: field ‘_pwent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:695: error: field ‘_servent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:710: error: field ‘_spent_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:721: error: field ‘_gmtime_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:724: error: field ‘_localtime_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:771: error: field ‘_random_struct’ has incomplete type /usr/lib/perl/5.8/CORE/reentr.h:772: error: expected specifier-qualifier-list before ‘int32_t’ In file included from /usr/lib/perl/5.8/CORE/perl.h:2756, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/av.h:13: error: expected specifier-qualifier-list before ‘ssize_t’ In file included from /usr/lib/perl/5.8/CORE/perl.h:2759, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/scope.h:232: error: expected specifier-qualifier-list before ‘sigjmp_buf’ In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:2931: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘getuid’ /usr/lib/perl/5.8/CORE/perl.h:2932: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘geteuid’ /usr/lib/perl/5.8/CORE/perl.h:2933: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘getgid’ /usr/lib/perl/5.8/CORE/perl.h:2934: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘getegid’ In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:3238:22: error: math.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/perl.h:3881, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/thrdvar.h:85: error: field ‘Tstatbuf’ has incomplete type /usr/lib/perl/5.8/CORE/thrdvar.h:86: error: field ‘Tstatcache’ has incomplete type /usr/lib/perl/5.8/CORE/thrdvar.h:91: error: field ‘Ttimesbuf’ has incomplete type In file included from /usr/lib/perl/5.8/CORE/perl.h:3883, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/intrpvar.h:66: error: expected specifier-qualifier-list before ‘time_t’ In file included from /usr/lib/perl/5.8/CORE/perl.h:3950, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/proto.h:128: error: expected declaration specifiers or ‘...’ before ‘mode_t’ /usr/lib/perl/5.8/CORE/proto.h:128: error: expected declaration specifiers or ‘...’ before ‘uid_t’ /usr/lib/perl/5.8/CORE/proto.h:297: error: expected declaration specifiers or ‘...’ before ‘off64_t’ /usr/lib/perl/5.8/CORE/proto.h:299: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_do_sysseek’ /usr/lib/perl/5.8/CORE/proto.h:300: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_do_tell’ /usr/lib/perl/5.8/CORE/proto.h:411: error: expected declaration specifiers or ‘...’ before ‘gid_t’ /usr/lib/perl/5.8/CORE/proto.h:411: error: expected declaration specifiers or ‘...’ before ‘uid_t’ /usr/lib/perl/5.8/CORE/proto.h:736: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_my_fork’ /usr/lib/perl/5.8/CORE/proto.h:1020: error: expected declaration specifiers or ‘...’ before ‘pid_t’ /usr/lib/perl/5.8/CORE/proto.h:1300: error: expected declaration specifiers or ‘...’ before ‘pid_t’ /usr/lib/perl/5.8/CORE/proto.h:1456: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/proto.h:2001: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_PerlIO_read’ /usr/lib/perl/5.8/CORE/proto.h:2002: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_PerlIO_write’ /usr/lib/perl/5.8/CORE/proto.h:2003: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_PerlIO_unread’ /usr/lib/perl/5.8/CORE/proto.h:2004: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_PerlIO_tell’ /usr/lib/perl/5.8/CORE/proto.h:2005: error: expected declaration specifiers or ‘...’ before ‘off64_t’ In file included from /usr/lib/perl/5.8/CORE/perl.h:3988, from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perlvars.h:31: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘PL_thr_key’ /usr/lib/perl/5.8/CORE/perlvars.h:48: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘PL_op_mutex’ /usr/lib/perl/5.8/CORE/perlvars.h:52: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘PL_dollarzero_mutex’ /usr/lib/perl/5.8/CORE/perl.h:4485:24: error: sys/ipc.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:4486:24: error: sys/sem.h: No such file or directory /usr/lib/perl/5.8/CORE/perl.h:4611:24: error: sys/file.h: No such file or directory In file included from /usr/lib/perl/5.8/CORE/perlapi.h:38, from /usr/lib/perl/5.8/CORE/XSUB.h:349, from Numeric.xs:3: /usr/lib/perl/5.8/CORE/intrpvar.h:66: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/intrpvar.h:237: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/intrpvar.h:238: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/intrpvar.h:239: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/intrpvar.h:240: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token In file included from /usr/lib/perl/5.8/CORE/perlapi.h:39, from /usr/lib/perl/5.8/CORE/XSUB.h:349, from Numeric.xs:3: /usr/lib/perl/5.8/CORE/perlvars.h:31: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/perlvars.h:48: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token /usr/lib/perl/5.8/CORE/perlvars.h:52: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token In file included from Numeric.xs:4: ppport.h:3042:1: warning: "PERL_UNUSED_DECL" redefined In file included from Numeric.xs:2: /usr/lib/perl/5.8/CORE/perl.h:163:1: warning: this is the location of the previous definition Numeric.c: In function ‘XS_Scalar__Util__Numeric_is_num’: Numeric.c:20: error: invalid type argument of ‘unary *’ Numeric.c:20: error: invalid type argument of ‘unary *’ Numeric.c:20: error: invalid type argument of ‘unary *’ Numeric.c:22: error: invalid type argument of ‘unary *’ Numeric.c:24: error: invalid type argument of ‘unary *’ Numeric.xs:16: error: invalid type argument of ‘unary *’ Numeric.xs:17: error: invalid type argument of ‘unary *’ Numeric.xs:20: error: invalid type argument of ‘unary *’ Numeric.xs:20: error: invalid type argument of ‘unary *’ Numeric.xs:20: error: invalid type argument of ‘unary *’ Numeric.xs:20: error: invalid type argument of ‘unary *’ Numeric.xs:20: error: invalid type argument of ‘unary *’ Numeric.c:36: error: invalid type argument of ‘unary *’ Numeric.c:36: error: invalid type argument of ‘unary *’ Numeric.c: In function ‘XS_Scalar__Util__Numeric_uvmax’: Numeric.c:43: error: invalid type argument of ‘unary *’ Numeric.c:43: error: invalid type argument of ‘unary *’ Numeric.c:43: error: invalid type argument of ‘unary *’ Numeric.c:45: error: invalid type argument of ‘unary *’ Numeric.xs:26: error: invalid type argument of ‘unary *’ Numeric.xs:26: error: invalid type argument of ‘unary *’ Numeric.xs:26: error: invalid type argument of ‘unary *’ Numeric.xs:26: error: invalid type argument of ‘unary *’ Numeric.xs:26: error: invalid type argument of ‘unary *’ Numeric.c:51: error: invalid type argument of ‘unary *’ Numeric.c:51: error: invalid type argument of ‘unary *’ Numeric.c: In function ‘boot_Scalar__Util__Numeric’: Numeric.c:60: error: invalid type argument of ‘unary *’ Numeric.c:60: error: invalid type argument of ‘unary *’ Numeric.c:60: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:63: error: invalid type argument of ‘unary *’ Numeric.c:65: error: invalid type argument of ‘unary *’ Numeric.c:65: error: invalid type argument of ‘unary *’ Numeric.c:66: error: invalid type argument of ‘unary *’ Numeric.c:66: error: invalid type argument of ‘unary *’ Numeric.c:67: error: invalid type argument of ‘unary *’ Numeric.c:67: error: invalid type argument of ‘unary *’ Numeric.c:67: error: invalid type argument of ‘unary *’ Numeric.c:67: error: invalid type argument of ‘unary *’ make: *** [Numeric.o] Error 1 /usr/bin/make -- NOT OK Running make test Can't test without successful make Running make install make had returned bad status, install seems impossible jmm@freekbox:~/bfwsandbox/sa/angel/astroportal/dtu8e/resources$
Lösung
Sie verpassen Ihre C-Bibliothek Entwicklungs-Header. Sie sollten ein Paket installieren, die sie hat. Diese sind notwendig, um dieses Modul zu installieren, da es einige Nicht-Perl-C-Code zu kompilieren und benötigt mehr über Ihr System kennen.
Ich kann nicht sagen, welche Art von Betriebssystem du bist, aber es sieht aus wie Linux. Wenn es Debians, sollten Sie in der Lage sein zu verwenden apt-get ‚libc6-dev‘ Paket zu installieren. Das wird die Header enthalten, die Sie dieses Modul kompilieren. Bei anderen Arten von Linux gibt es ein ähnlich benannten Paket sein.
Andere Tipps
Es kann nicht grundlegende System-Header finden. Entweder Ihr gehören Weg ernsthaft vermasselt wird, oder die Header nicht installiert sind.
Furchtbar schwer, ohne Zeilenumbrüche zu lesen, aber es sieht aus wie Sie sys/types.h
auf Ihrem System fehlen. Haben Sie eine vollständige Build-Umgebung (gcc, make, etc.) installiert? Welche OS und Distribution verwenden Sie?
In Zukunft sollten Sie eine Ausgabe wie diese bockquote (wählen Sie den Text und klicken Sie auf die Kurstaste).