Почему Scalar::Util::Numeric не устанавливается правильно?

StackOverflow https://stackoverflow.com/questions/75261

  •  09-06-2019
  •  | 
  •  

Вопрос

Извините, если все это сочетается;похоже, разрывы строк не отображаются в окне предварительного просмотра.Я получил этот вывод при запуске sudo cpan Scalar::Util::Numeric;спасибо, Джош.

jmm@freekbox:~/bfwsandbox/sa/angel/astroportal/dtu8e/resources$ sudo cpan Scalar::Util::Numeric
[sudo] password for jmm: 
CPAN: Storable loaded ok
Going to read /home/jmm/.cpan/Metadata
  Database was generated on Tue, 09 Sep 2008 16:02:51 GMT
CPAN: LWP::UserAgent loaded ok
Fetching with LWP:
  ftp://ftp.perl.org/pub/CPAN/authors/01mailrc.txt.gz
Going to read /home/jmm/.cpan/sources/authors/01mailrc.txt.gz
Fetching with LWP:
  ftp://ftp.perl.org/pub/CPAN/modules/02packages.details.txt.gz
Going to read /home/jmm/.cpan/sources/modules/02packages.details.txt.gz
  Database was generated on Tue, 16 Sep 2008 16:02:50 GMT

  There's a new CPAN.pm version (v1.9205) available!
  [Current version is v1.7602]
  You might want to try
    install Bundle::CPAN
    reload cpan
  without quitting the current session. It should be a seamless upgrade
  while we are running...

Fetching with LWP:
  ftp://ftp.perl.org/pub/CPAN/modules/03modlist.data.gz
Going to read /home/jmm/.cpan/sources/modules/03modlist.data.gz
Going to write /home/jmm/.cpan/Metadata
Running install for module Scalar::Util::Numeric
Running make for C/CH/CHOCOLATE/Scalar-Util-Numeric-0.02.tar.gz
CPAN: Digest::MD5 loaded ok
Checksum for /home/jmm/.cpan/sources/authors/id/C/CH/CHOCOLATE/Scalar-Util-Numeric-0.02.tar.gz ok
Scanning cache /home/jmm/.cpan/build for sizes
Scalar-Util-Numeric-0.02/
Scalar-Util-Numeric-0.02/Changes
Scalar-Util-Numeric-0.02/lib/
Scalar-Util-Numeric-0.02/lib/Scalar/
Scalar-Util-Numeric-0.02/lib/Scalar/Util/
Scalar-Util-Numeric-0.02/lib/Scalar/Util/Numeric.pm
Scalar-Util-Numeric-0.02/Makefile.PL
Scalar-Util-Numeric-0.02/MANIFEST
Scalar-Util-Numeric-0.02/META.yml
Scalar-Util-Numeric-0.02/Numeric.xs
Scalar-Util-Numeric-0.02/ppport.h
Scalar-Util-Numeric-0.02/README
Scalar-Util-Numeric-0.02/t/
Scalar-Util-Numeric-0.02/t/pod.t
Scalar-Util-Numeric-0.02/t/Scalar-Util-Numeric.t
Removing previously used /home/jmm/.cpan/build/Scalar-Util-Numeric-0.02

  CPAN.pm: Going to build C/CH/CHOCOLATE/Scalar-Util-Numeric-0.02.tar.gz

Checking if your kit is complete...
Looks good
Writing Makefile for Scalar::Util::Numeric
cp lib/Scalar/Util/Numeric.pm blib/lib/Scalar/Util/Numeric.pm
AutoSplitting blib/lib/Scalar/Util/Numeric.pm (blib/lib/auto/Scalar/Util/Numeric)
/usr/bin/perl /usr/share/perl/5.8/ExtUtils/xsubpp  -typemap /usr/share/perl/5.8/ExtUtils/typemap  Numeric.xs > Numeric.xsc && mv Numeric.xsc Numeric.c
cc -c   -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O3   -DVERSION=\"0.02\" -DXS_VERSION=\"0.02\" -fPIC "-I/usr/lib/perl/5.8/CORE"   Numeric.c
In file included from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/perl.h:420:24: error: sys/types.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:451:19: error: ctype.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:463:23: error: locale.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:480:20: error: setjmp.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:486:26: error: sys/param.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:491:23: error: stdlib.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:496:23: error: unistd.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:776:23: error: string.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:925:27: error: netinet/in.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:929:26: error: arpa/inet.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:939:25: error: sys/stat.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:961:21: error: time.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:968:25: error: sys/time.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:975:27: error: sys/times.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:982:19: error: errno.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:997:25: error: sys/socket.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:1024:21: error: netdb.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:1127:24: error: sys/ioctl.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:1156:23: error: dirent.h: No such file or directory
In file included from /usr/lib/gcc/i486-linux-gnu/4.2.3/include/syslimits.h:7,
                 from /usr/lib/gcc/i486-linux-gnu/4.2.3/include/limits.h:11,
                 from /usr/lib/perl/5.8/CORE/perl.h:1510,
                 from Numeric.xs:2:
/usr/lib/gcc/i486-linux-gnu/4.2.3/include/limits.h:122:61: error: limits.h: No such file or directory
In file included from /usr/lib/perl/5.8/CORE/perl.h:2120,
                 from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/handy.h:136:25: error: inttypes.h: No such file or directory
In file included from /usr/lib/perl/5.8/CORE/perl.h:2284,
                 from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/unixish.h:106:21: error: signal.h: No such file or directory
In file included from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/perl.h:2421:33: error: pthread.h: No such file or directory
In file included from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/perl.h:2423: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘perl_os_thread’
/usr/lib/perl/5.8/CORE/perl.h:2424: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘perl_mutex’
/usr/lib/perl/5.8/CORE/perl.h:2425: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘perl_cond’
/usr/lib/perl/5.8/CORE/perl.h:2426: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘perl_key’
In file included from /usr/lib/perl/5.8/CORE/iperlsys.h:51,
                 from /usr/lib/perl/5.8/CORE/perl.h:2733,
                 from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/perlio.h:65:19: error: stdio.h: No such file or directory
In file included from /usr/lib/perl/5.8/CORE/iperlsys.h:51,
                 from /usr/lib/perl/5.8/CORE/perl.h:2733,
                 from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/perlio.h:259: error: expected ‘)’ before ‘*’ token
/usr/lib/perl/5.8/CORE/perlio.h:262: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
/usr/lib/perl/5.8/CORE/perlio.h:265: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
/usr/lib/perl/5.8/CORE/perlio.h:268: error: expected declaration specifiers or ‘...’ before ‘FILE’
In file included from /usr/lib/perl/5.8/CORE/perl.h:2747,
                 from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/sv.h:389: error: expected specifier-qualifier-list before ‘DIR’
In file included from /usr/lib/perl/5.8/CORE/op.h:497,
                 from /usr/lib/perl/5.8/CORE/perl.h:2754,
                 from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/reentr.h:72:20: error: pwd.h: No such file or directory
/usr/lib/perl/5.8/CORE/reentr.h:75:20: error: grp.h: No such file or directory
/usr/lib/perl/5.8/CORE/reentr.h:85:26: error: crypt.h: No such file or directory
/usr/lib/perl/5.8/CORE/reentr.h:90:27: error: shadow.h: No such file or directory
In file included from /usr/lib/perl/5.8/CORE/op.h:497,
                 from /usr/lib/perl/5.8/CORE/perl.h:2754,
                 from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/reentr.h:612: error: field ‘_crypt_struct’ has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:620: error: field ‘_drand48_struct’ has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:624: error: field ‘_grent_struct’ has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:635: error: field ‘_hostent_struct’ has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:654: error: field ‘_netent_struct’ has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:669: error: field ‘_protoent_struct’ has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:684: error: field ‘_pwent_struct’ has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:695: error: field ‘_servent_struct’ has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:710: error: field ‘_spent_struct’ has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:721: error: field ‘_gmtime_struct’ has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:724: error: field ‘_localtime_struct’ has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:771: error: field ‘_random_struct’ has incomplete type
/usr/lib/perl/5.8/CORE/reentr.h:772: error: expected specifier-qualifier-list before ‘int32_t’
In file included from /usr/lib/perl/5.8/CORE/perl.h:2756,
                 from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/av.h:13: error: expected specifier-qualifier-list before ‘ssize_t’
In file included from /usr/lib/perl/5.8/CORE/perl.h:2759,
                 from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/scope.h:232: error: expected specifier-qualifier-list before ‘sigjmp_buf’
In file included from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/perl.h:2931: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘getuid’
/usr/lib/perl/5.8/CORE/perl.h:2932: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘geteuid’
/usr/lib/perl/5.8/CORE/perl.h:2933: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘getgid’
/usr/lib/perl/5.8/CORE/perl.h:2934: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘getegid’
In file included from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/perl.h:3238:22: error: math.h: No such file or directory
In file included from /usr/lib/perl/5.8/CORE/perl.h:3881,
                 from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/thrdvar.h:85: error: field ‘Tstatbuf’ has incomplete type
/usr/lib/perl/5.8/CORE/thrdvar.h:86: error: field ‘Tstatcache’ has incomplete type
/usr/lib/perl/5.8/CORE/thrdvar.h:91: error: field ‘Ttimesbuf’ has incomplete type
In file included from /usr/lib/perl/5.8/CORE/perl.h:3883,
                 from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/intrpvar.h:66: error: expected specifier-qualifier-list before ‘time_t’
In file included from /usr/lib/perl/5.8/CORE/perl.h:3950,
                 from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/proto.h:128: error: expected declaration specifiers or ‘...’ before ‘mode_t’
/usr/lib/perl/5.8/CORE/proto.h:128: error: expected declaration specifiers or ‘...’ before ‘uid_t’
/usr/lib/perl/5.8/CORE/proto.h:297: error: expected declaration specifiers or ‘...’ before ‘off64_t’
/usr/lib/perl/5.8/CORE/proto.h:299: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_do_sysseek’
/usr/lib/perl/5.8/CORE/proto.h:300: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_do_tell’
/usr/lib/perl/5.8/CORE/proto.h:411: error: expected declaration specifiers or ‘...’ before ‘gid_t’
/usr/lib/perl/5.8/CORE/proto.h:411: error: expected declaration specifiers or ‘...’ before ‘uid_t’
/usr/lib/perl/5.8/CORE/proto.h:736: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_my_fork’
/usr/lib/perl/5.8/CORE/proto.h:1020: error: expected declaration specifiers or ‘...’ before ‘pid_t’
/usr/lib/perl/5.8/CORE/proto.h:1300: error: expected declaration specifiers or ‘...’ before ‘pid_t’
/usr/lib/perl/5.8/CORE/proto.h:1456: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
/usr/lib/perl/5.8/CORE/proto.h:2001: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_PerlIO_read’
/usr/lib/perl/5.8/CORE/proto.h:2002: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_PerlIO_write’
/usr/lib/perl/5.8/CORE/proto.h:2003: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_PerlIO_unread’
/usr/lib/perl/5.8/CORE/proto.h:2004: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Perl_PerlIO_tell’
/usr/lib/perl/5.8/CORE/proto.h:2005: error: expected declaration specifiers or ‘...’ before ‘off64_t’
In file included from /usr/lib/perl/5.8/CORE/perl.h:3988,
                 from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/perlvars.h:31: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘PL_thr_key’
/usr/lib/perl/5.8/CORE/perlvars.h:48: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘PL_op_mutex’
/usr/lib/perl/5.8/CORE/perlvars.h:52: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘PL_dollarzero_mutex’
/usr/lib/perl/5.8/CORE/perl.h:4485:24: error: sys/ipc.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:4486:24: error: sys/sem.h: No such file or directory
/usr/lib/perl/5.8/CORE/perl.h:4611:24: error: sys/file.h: No such file or directory
In file included from /usr/lib/perl/5.8/CORE/perlapi.h:38,
                 from /usr/lib/perl/5.8/CORE/XSUB.h:349,
                 from Numeric.xs:3:
/usr/lib/perl/5.8/CORE/intrpvar.h:66: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
/usr/lib/perl/5.8/CORE/intrpvar.h:237: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
/usr/lib/perl/5.8/CORE/intrpvar.h:238: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
/usr/lib/perl/5.8/CORE/intrpvar.h:239: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
/usr/lib/perl/5.8/CORE/intrpvar.h:240: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
In file included from /usr/lib/perl/5.8/CORE/perlapi.h:39,
                 from /usr/lib/perl/5.8/CORE/XSUB.h:349,
                 from Numeric.xs:3:
/usr/lib/perl/5.8/CORE/perlvars.h:31: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
/usr/lib/perl/5.8/CORE/perlvars.h:48: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
/usr/lib/perl/5.8/CORE/perlvars.h:52: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
In file included from Numeric.xs:4:
ppport.h:3042:1: warning: "PERL_UNUSED_DECL" redefined
In file included from Numeric.xs:2:
/usr/lib/perl/5.8/CORE/perl.h:163:1: warning: this is the location of the previous definition
Numeric.c: In function ‘XS_Scalar__Util__Numeric_is_num’:
Numeric.c:20: error: invalid type argument of ‘unary *’
Numeric.c:20: error: invalid type argument of ‘unary *’
Numeric.c:20: error: invalid type argument of ‘unary *’
Numeric.c:22: error: invalid type argument of ‘unary *’
Numeric.c:24: error: invalid type argument of ‘unary *’
Numeric.xs:16: error: invalid type argument of ‘unary *’
Numeric.xs:17: error: invalid type argument of ‘unary *’
Numeric.xs:20: error: invalid type argument of ‘unary *’
Numeric.xs:20: error: invalid type argument of ‘unary *’
Numeric.xs:20: error: invalid type argument of ‘unary *’
Numeric.xs:20: error: invalid type argument of ‘unary *’
Numeric.xs:20: error: invalid type argument of ‘unary *’
Numeric.c:36: error: invalid type argument of ‘unary *’
Numeric.c:36: error: invalid type argument of ‘unary *’
Numeric.c: In function ‘XS_Scalar__Util__Numeric_uvmax’:
Numeric.c:43: error: invalid type argument of ‘unary *’
Numeric.c:43: error: invalid type argument of ‘unary *’
Numeric.c:43: error: invalid type argument of ‘unary *’
Numeric.c:45: error: invalid type argument of ‘unary *’
Numeric.xs:26: error: invalid type argument of ‘unary *’
Numeric.xs:26: error: invalid type argument of ‘unary *’
Numeric.xs:26: error: invalid type argument of ‘unary *’
Numeric.xs:26: error: invalid type argument of ‘unary *’
Numeric.xs:26: error: invalid type argument of ‘unary *’
Numeric.c:51: error: invalid type argument of ‘unary *’
Numeric.c:51: error: invalid type argument of ‘unary *’
Numeric.c: In function ‘boot_Scalar__Util__Numeric’:
Numeric.c:60: error: invalid type argument of ‘unary *’
Numeric.c:60: error: invalid type argument of ‘unary *’
Numeric.c:60: error: invalid type argument of ‘unary *’
Numeric.c:63: error: invalid type argument of ‘unary *’
Numeric.c:63: error: invalid type argument of ‘unary *’
Numeric.c:63: error: invalid type argument of ‘unary *’
Numeric.c:63: error: invalid type argument of ‘unary *’
Numeric.c:63: error: invalid type argument of ‘unary *’
Numeric.c:63: error: invalid type argument of ‘unary *’
Numeric.c:63: error: invalid type argument of ‘unary *’
Numeric.c:63: error: invalid type argument of ‘unary *’
Numeric.c:63: error: invalid type argument of ‘unary *’
Numeric.c:63: error: invalid type argument of ‘unary *’
Numeric.c:63: error: invalid type argument of ‘unary *’
Numeric.c:65: error: invalid type argument of ‘unary *’
Numeric.c:65: error: invalid type argument of ‘unary *’
Numeric.c:66: error: invalid type argument of ‘unary *’
Numeric.c:66: error: invalid type argument of ‘unary *’
Numeric.c:67: error: invalid type argument of ‘unary *’
Numeric.c:67: error: invalid type argument of ‘unary *’
Numeric.c:67: error: invalid type argument of ‘unary *’
Numeric.c:67: error: invalid type argument of ‘unary *’
make: *** [Numeric.o] Error 1
  /usr/bin/make  -- NOT OK
Running make test
  Can't test without successful make
Running make install
  make had returned bad status, install seems impossible
jmm@freekbox:~/bfwsandbox/sa/angel/astroportal/dtu8e/resources$
Это было полезно?

Решение

Вам не хватает заголовков разработки библиотеки C.Вам следует установить пакет, в котором они есть.Они необходимы для установки этого модуля, поскольку он должен скомпилировать некоторый код C, отличный от Perl, и ему необходимо больше узнать о вашей системе.

Я не могу сказать, какая у вас операционная система, но похоже на Linux.Если это Debian, вы сможете использовать apt-get для установки пакета libc6-dev.Он будет содержать заголовки, необходимые для компиляции этого модуля.В других типах Linux будет пакет с таким же названием.

Другие советы

Он не может найти основные системные заголовки.Либо ваш путь включения серьезно испорчен, либо заголовки не установлены.

Ужасно трудно читать без переносов строк, но похоже, что вы промахнулись sys/types.h в вашей системе.Установлена ​​ли у вас полная среда сборки (gcc, make и т. д.)?Какую ОС и дистрибутив вы используете?

В дальнейшем вам следует цитировать вывод следующим образом (выделите текст и нажмите кнопку цитировать).

Лицензировано под: CC-BY-SA с атрибуция
Не связан с StackOverflow
scroll top