كيف أقوم بقطع صفيف في Excel VBA؟
-
05-07-2019 - |
سؤال
ما هي الوظيفة التي يمكنني استخدامها في Excel VBA لتقطيع صفيف؟
المحلول
Application.WorksheetFunction.index (صفيف ، صف ، عمود)
إذا قمت بتحديد قيمة صفرية للصف أو العمود ، فستحصل على العمود أو الصف بالكامل المحدد.
مثال:
Application.WorksheetFunction.index (Array ، 0 ، 3)
هذا سوف يعطيك العمود الثالث بأكمله.
إذا قمت بتحديد كل من الصف والعمود على أنهما غير صفريين ، فستحصل على العنصر المحدد فقط. لا توجد طريقة سهلة للحصول على شريحة أصغر من صف أو عمود كامل.
قيود: هناك حد لحجم الصفيف الذي WorksheetFunction.Index
يمكنك التعامل إذا كنت تستخدم إصدارًا جديدًا من Excel. إذا array
يحتوي على أكثر من 65،536 صفًا أو 65،536 عمودًا ، ثم يلقي خطأ "غير متطابق". إذا كانت هذه مشكلة بالنسبة لك ، فراجع هذه الإجابة الأكثر تعقيدًا وهو لا يخضع لنفس القيد.
إليكم الوظيفة التي كتبتها للقيام بكل تقطيع 1D و 2D:
Public Function GetArraySlice2D(Sarray As Variant, Stype As String, Sindex As Integer, Sstart As Integer, Sfinish As Integer) As Variant
' this function returns a slice of an array, Stype is either row or column
' Sstart is beginning of slice, Sfinish is end of slice (Sfinish = 0 means entire
' row or column is taken), Sindex is the row or column to be sliced
' (NOTE: 1 is always the first row or first column)
' an Sindex value of 0 means that the array is one dimensional 3/20/09 ljr
Dim vtemp() As Variant
Dim i As Integer
On Err GoTo ErrHandler
Select Case Sindex
Case 0
If Sfinish - Sstart = UBound(Sarray) - LBound(Sarray) Then
vtemp = Sarray
Else
ReDim vtemp(1 To Sfinish - Sstart + 1)
For i = 1 To Sfinish - Sstart + 1
vtemp(i) = Sarray(i + Sstart - 1)
Next i
End If
Case Else
Select Case Stype
Case "row"
If Sfinish = 0 Or (Sstart = LBound(Sarray, 2) And Sfinish = UBound(Sarray, 2)) Then
vtemp = Application.WorksheetFunction.Index(Sarray, Sindex, 0)
Else
ReDim vtemp(1 To Sfinish - Sstart + 1)
For i = 1 To Sfinish - Sstart + 1
vtemp(i) = Sarray(Sindex, i + Sstart - 1)
Next i
End If
Case "column"
If Sfinish = 0 Or (Sstart = LBound(Sarray, 1) And Sfinish = UBound(Sarray, 1)) Then
vtemp = Application.WorksheetFunction.Index(Sarray, 0, Sindex)
Else
ReDim vtemp(1 To Sfinish - Sstart + 1)
For i = 1 To Sfinish - Sstart + 1
vtemp(i) = Sarray(i + Sstart - 1, Sindex)
Next i
End If
End Select
End Select
GetArraySlice2D = vtemp
Exit Function
ErrHandler:
Dim M As Integer
M = MsgBox("Bad Array Input", vbOKOnly, "GetArraySlice2D")
End Function
نصائح أخرى
فيما يلي طريقة سريعة لتقطيع المصفوفات المتغيرة Excel. تم وضع معظم هذا معًا باستخدام المعلومات من هذا الموقع الممتاز http://bytecomb.com/vba-reference/
في الأساس ، تم بناء صفيف الوجهة مسبقًا كمتغير 1D أو ثنائي الأبعاد فارغ ويتم تمريره إلى Sub مع صفيف المصدر وفهرس العناصر المراد شرائحهم. نظرًا للطريقة التي يتم بها تخزين المصفوفات في الذاكرة ، فإنه أسرع بكثير في تقطيع العمود عن صف حيث يتيح تخطيط الذاكرة نسخ كتلة واحدة.
الشيء الجيد في هذا هو أنه يتجاوز حد صف Excel.
Option Explicit
#If Win64 Then
Public Const PTR_LENGTH As Long = 8
Public Declare PtrSafe Function GetTickCount Lib "kernel32" () As Long
Public Declare PtrSafe Sub Mem_Copy Lib "kernel32" Alias "RtlMoveMemory" (ByRef Destination As Any, ByRef Source As Any, ByVal Length As Long)
Private Declare PtrSafe Function VarPtrArray Lib "VBE7" Alias "VarPtr" (ByRef Var() As Any) As LongPtr
Private Declare PtrSafe Sub CopyMemory Lib "kernel32" Alias "RtlMoveMemory" (Destination As Any, Source As Any, ByVal Length As Long)
Private Declare PtrSafe Sub FillMemory Lib "kernel32" Alias "RtlFillMemory" (Destination As Any, ByVal Length As Long, ByVal Fill As Byte)
#Else
Public Const PTR_LENGTH As Long = 4
Public Declare Function GetTickCount Lib "kernel32" () As Long
Public Declare Sub Mem_Copy Lib "kernel32" Alias "RtlMoveMemory" (ByRef Destination As Any, ByRef Source As Any, ByVal Length As Long)
Private Declare Function VarPtrArray Lib "VBE7" Alias "VarPtr" (ByRef Var() As Any) As LongPtr
Private Declare Sub CopyMemory Lib "kernel32" Alias "RtlMoveMemory" (Destination As Any, Source As Any, ByVal Length As Long)
Private Declare Sub FillMemory Lib "kernel32" Alias "RtlFillMemory" (Destination As Any, ByVal Length As Long, ByVal Fill As Byte)
#End If
Private Type SAFEARRAYBOUND
cElements As Long
lLbound As Long
End Type
Private Type SAFEARRAY_VECTOR
cDims As Integer
fFeatures As Integer
cbElements As Long
cLocks As Long
pvData As LongPtr
rgsabound(0) As SAFEARRAYBOUND
End Type
Sub SliceColumn(ByVal idx As Long, ByRef arrayToSlice() As Variant, ByRef slicedArray As Variant)
'slicedArray can be passed as a 1d or 2d array
'sliceArray can also be part bound, eg slicedArray(1 to 100) or slicedArray(10 to 100)
Dim ptrToArrayVar As LongPtr
Dim ptrToSafeArray As LongPtr
Dim ptrToArrayData As LongPtr
Dim ptrToArrayData2 As LongPtr
Dim uSAFEARRAY As SAFEARRAY_VECTOR
Dim ptrCursor As LongPtr
Dim cbElements As Long
Dim atsBound1 As Long
Dim elSize As Long
'determine bound1 of source array (ie row Count)
atsBound1 = UBound(arrayToSlice, 1)
'get pointer to source array Safearray
ptrToArrayVar = VarPtrArray(arrayToSlice)
CopyMemory ptrToSafeArray, ByVal ptrToArrayVar, PTR_LENGTH
CopyMemory uSAFEARRAY, ByVal ptrToSafeArray, LenB(uSAFEARRAY)
ptrToArrayData = uSAFEARRAY.pvData
'determine byte size of source elements
cbElements = uSAFEARRAY.cbElements
'get pointer to destination array Safearray
ptrToArrayVar = VarPtr(slicedArray) + 8 'Variant reserves first 8bytes
CopyMemory ptrToSafeArray, ByVal ptrToArrayVar, PTR_LENGTH
CopyMemory uSAFEARRAY, ByVal ptrToSafeArray, LenB(uSAFEARRAY)
ptrToArrayData2 = uSAFEARRAY.pvData
'determine elements size
elSize = UBound(slicedArray, 1) - LBound(slicedArray, 1) + 1
'determine start position of data in source array
ptrCursor = ptrToArrayData + (((idx - 1) * atsBound1 + LBound(slicedArray, 1) - 1) * cbElements)
'Copy source array to destination array
CopyMemory ByVal ptrToArrayData2, ByVal ptrCursor, cbElements * elSize
End Sub
Sub SliceRow(ByVal idx As Long, ByRef arrayToSlice() As Variant, ByRef slicedArray As Variant)
'slicedArray can be passed as a 1d or 2d array
'sliceArray can also be part bound, eg slicedArray(1 to 100) or slicedArray(10 to 100)
Dim ptrToArrayVar As LongPtr
Dim ptrToSafeArray As LongPtr
Dim ptrToArrayData As LongPtr
Dim ptrToArrayData2 As LongPtr
Dim uSAFEARRAY As SAFEARRAY_VECTOR
Dim ptrCursor As LongPtr
Dim cbElements As Long
Dim atsBound1 As Long
Dim i As Long
'determine bound1 of source array (ie row Count)
atsBound1 = UBound(arrayToSlice, 1)
'get pointer to source array Safearray
ptrToArrayVar = VarPtrArray(arrayToSlice)
CopyMemory ptrToSafeArray, ByVal ptrToArrayVar, PTR_LENGTH
CopyMemory uSAFEARRAY, ByVal ptrToSafeArray, LenB(uSAFEARRAY)
ptrToArrayData = uSAFEARRAY.pvData
'determine byte size of source elements
cbElements = uSAFEARRAY.cbElements
'get pointer to destination array Safearray
ptrToArrayVar = VarPtr(slicedArray) + 8 'Variant reserves first 8bytes
CopyMemory ptrToSafeArray, ByVal ptrToArrayVar, PTR_LENGTH
CopyMemory uSAFEARRAY, ByVal ptrToSafeArray, LenB(uSAFEARRAY)
ptrToArrayData2 = uSAFEARRAY.pvData
ptrCursor = ptrToArrayData + ((idx - 1) * cbElements)
For i = LBound(slicedArray, 1) To UBound(slicedArray, 1)
CopyMemory ByVal ptrToArrayData2, ByVal ptrCursor, cbElements
ptrCursor = ptrCursor + (cbElements * atsBound1)
ptrToArrayData2 = ptrToArrayData2 + cbElements
Next i
End Sub
مثال الاستخدام:
Sub exampleUsage()
Dim sourceArr() As Variant
Dim destArr As Variant
Dim sliceIndex As Long
On Error GoTo Err:
sourceArr = Sheet1.Range("A1:D10000").Value2
sliceIndex = 2 'Slice column 2 / slice row 2
'Build target array
ReDim destArr(20 To 10000) '1D array from row 20 to 10000
' ReDim destArr(1 To 10000) '1D array from row 1 to 10000
' ReDim destArr(20 To 10000, 1 To 1) '2D array from row 20 to 10000
' ReDim destArr(1 To 10000, 1 To 1) '2D array from row 1 to 10000
'Slice Column
SliceColumn sliceIndex, sourceArr, destArr
'Slice Row
ReDim destArr(1 To 4)
SliceRow sliceIndex, sourceArr, destArr
Err:
'Tidy Up See ' http://stackoverflow.com/questions/16323776/copy-an-array-reference-in-vba/16343887#16343887
FillMemory destArr, 16, 0
End Sub
كانت التوقيت على وحدة المعالجة المركزية القديمة المزدوجة باستخدام الاختبار التالي
Sub timeMethods()
Const trials As Long = 10
Const rowsToCopy As Long = 1048576
Dim rng As Range
Dim Arr() As Variant
Dim newArr As Variant
Dim newArr2 As Variant
Dim t As Long, t1 As Long, t2 As Long, t3 As Long
Dim i As Long
On Error GoTo Err
'Setup Conditions 1time only
Sheet1.Cells.Clear
Sheet1.Range("A1:D1").Value = Split("A1,B1,C1,D1", ",") 'Strings
' Sheet1.Range("A1:D1").Value = Split("1,1,1,1", ",") 'Longs
Sheet1.Range("A1:D1").AutoFill Destination:=Sheet1.Range("A1:D" & rowsToCopy), Type:=xlFillDefault
'Build source data
Arr = Sheet1.Range("A1:D" & rowsToCopy).Value
Set rng = Sheet1.Range("A1:D" & rowsToCopy)
'Build target container
ReDim newArr(1 To rowsToCopy)
Debug.Print "Trials=" & trials & " Rows=" & rowsToCopy
'Range
t3 = 0
For t = 1 To trials
t1 = GetTickCount
For i = LBound(newArr, 1) To UBound(newArr, 1)
newArr(i) = rng(i, 2).Value2
Next i
t2 = GetTickCount
t3 = t3 + (t2 - t1)
Debug.Print "Range: " & t2 - t1
Next t
Debug.Print "Range Avg ms: " & t3 / trials
'Array
t3 = 0
For t = 1 To trials
t1 = GetTickCount
For i = LBound(newArr, 1) To UBound(newArr, 1)
newArr(i) = Arr(i, 2)
Next i
t2 = GetTickCount
t3 = t3 + (t2 - t1)
Debug.Print "Array: " & t2 - t1
Next t
Debug.Print "Array Avg ms: " & t3 / trials
'Index
t3 = 0
For t = 1 To trials
t1 = GetTickCount
newArr2 = WorksheetFunction.Index(rng, 0, 2) 'newArr2 2d
t2 = GetTickCount
t3 = t3 + (t2 - t1)
Debug.Print "Index: " & t2 - t1
Next t
Debug.Print "Index Avg ms: " & t3 / trials
'CopyMemBlock
t3 = 0
For t = 1 To trials
t1 = GetTickCount
SliceColumn 2, Arr, newArr
t2 = GetTickCount
t3 = t3 + (t2 - t1)
Debug.Print "CopyMem: " & t2 - t1
Next t
Debug.Print "CopyMem Avg ms: " & t3 / trials
Err:
'Tidy Up
FillMemory newArr, 16, 0
End Sub
شيئان ، لا يدعم VBA تقطيع المصفوفة ، لذا فكل ما تستخدمه ، سيتعين عليك لفك. ولكن نظرًا لأن هذا مخصص فقط لـ Excel ، يمكنك استخدام فهرس وظيفة ورقة العمل لتقطيع الصفيف.
Sub Test()
'All example return a 1 based 2D array.
Dim myArr As Variant 'This var must be generic to work.
'Get whole range:
myArr = ActiveSheet.UsedRange
'Get just column 1:
myArr = WorksheetFunction.Index(ActiveSheet.UsedRange, 0, 1)
'Get just row 5
myArr = WorksheetFunction.Index(ActiveSheet.UsedRange, 5, 0)
End Sub
يحتوي حل Lance على خلل لأنه لا يحترم قيمة بداية الإزاحة مع وجود فرعي من الطول غير المحدد ، كما وجدت كيف يعمل مربكة للغاية. أقدم (نأمل) حل أكثر شفافية أدناه.
Public Function GetSubTable(vIn As Variant, Optional ByVal iStartRow As Integer, Optional ByVal iStartCol As Integer, Optional ByVal iHeight As Integer, Optional ByVal iWidth As Integer) As Variant
Dim vReturn As Variant
Dim iInRowLower As Integer
Dim iInRowUpper As Integer
Dim iInColLower As Integer
Dim iInColUpper As Integer
Dim iEndRow As Integer
Dim iEndCol As Integer
Dim iRow As Integer
Dim iCol As Integer
iInRowLower = LBound(vIn, 1)
iInRowUpper = UBound(vIn, 1)
iInColLower = LBound(vIn, 2)
iInColUpper = UBound(vIn, 2)
If iStartRow = 0 Then
iStartRow = iInRowLower
End If
If iStartCol = 0 Then
iStartCol = iInColLower
End If
If iHeight = 0 Then
iHeight = iInRowUpper - iStartRow + 1
End If
If iWidth = 0 Then
iWidth = iInColUpper - iStartCol + 1
End If
iEndRow = iStartRow + iHeight - 1
iEndCol = iStartCol + iWidth - 1
ReDim vReturn(1 To iEndRow - iStartRow + 1, 1 To iEndCol - iStartCol + 1)
For iRow = iStartRow To iEndRow
For iCol = iStartCol To iEndCol
vReturn(iRow - iStartRow + 1, iCol - iStartCol + 1) = vIn(iRow, iCol)
Next
Next
GetSubTable = vReturn
End Function
هنا بطريقة أخرى.
هذا ليس متعدد الأبعاد ولكنه سيعمل صف واحد وعمود واحد.
المعلمات F و T هي على أساس الصفر.
Function slice(ByVal arr, ByVal f, ByVal t)
slice = Application.Index(arr, Evaluate("Transpose(Row(" & f + 1 & ":" & t + 1 & "))"))
End Function
إليك وظيفة أنيقة كتبتها إلى مجموعة فرعية ثنائية الأبعاد
Function Subset2D(arr As Variant, Optional rowStart As Long = 1, Optional rowStop As Long = -1, Optional colIndices As Variant) As Variant
'Subset a 2d array (arr)
'If rowStop = -1, all rows are returned
'colIndices can be provided as a variant array like Array(1,3)
'if colIndices is not provided, all columns are returned
Dim newarr() As Variant, newRows As Long, newCols As Long, i As Long, k As Long, refCol As Long
'Set the correct rowStop
If rowStop = -1 Then rowStop = UBound(arr, 1)
'Set the colIndices if they were not provided
If IsMissing(colIndices) Then
ReDim colIndices(1 To UBound(arr, 2))
For k = 1 To UBound(arr, 2)
colIndices(k) = k
Next k
End If
'Get the dimensions of newarr
newRows = rowStop - rowStart + 1
newCols = UBound(colIndices) + 1
ReDim newarr(1 To newRows, 1 To newCols)
'Loop through each empty element of newarr and set its value
For k = 1 To UBound(newarr, 2) 'Loop through each column
refCol = colIndices(k - 1) 'Get the corresponding reference column
For i = 1 To UBound(newarr, 1) 'Loop through each row
newarr(i, k) = arr(i + rowStart - 1, refCol) 'Set the value
Next i
Next k
Subset2D = newarr
End Function
يمكنك استخدام مجموعة من الصفوف والأعمدة وإزاحة وتغيير حجم الخصائص للحصول على مجموعة فرعية من النطاق.
على سبيل المثال ، إذا كان لديك نطاق يبلغ 5 أعمدة من 3 صفوف:
Set rng = Range("A1:E3")
يمكنك الحصول على أي مجموعة فرعية عن طريق الجمع بشكل مناسب بين الخصائص أعلاه. على سبيل المثال ، إذا كنت ترغب في الحصول على الخلايا الثلاثة الصحيح في الصف الثاني (أي "C2: E2" في المثال أعلاه) ، فيمكنك فعل شيء مثل:
Set rngSubset = rng.Rows(2).Offset(0, rng.Columns.Count - 3).Resize(1, 3)
يمكنك بعد ذلك لف هذا في وظيفة VBA.
لا يوجد مباشر slice
وظيفة للمصفوفات ، تختلف عن العديد من اللغات الحديثة الأخرى.
ومع ذلك ، هناك مقتطفات رمز قصيرة مفيدة للغاية لهذا الغرض. أدناه ، حل كامل لصفائف 1D:
'*************************************************************
'* Fill(N1,N2)
'* Create 1 dimension array with values from N1 to N2 step 1
'*************************************************************
Function Fill(N1 As Long, N2 As Long) As Variant
Dim Arr As Variant
If N2 < N1 Then
Fill = False
Exit Function
End If
Fill = WorksheetFunction.Transpose(Evaluate("Row(" & N1 & ":" & N2 & ")"))
End Function
'**********************************************************************
'* Slice(AArray, [N1,N2])
'* Slice an array between indices N1 to N2
'***********************************************************************
Function Slice(VArray As Variant, Optional N1 As Long = 1, Optional N2 As Long = 0) As Variant
Dim Indices As Variant
If N2 = 0 Then N2 = UBound(VArray)
If N1 = LBound(VArray) And N2 = UBound(VArray) Then
Slice = VArray
Else
Indices = Fill(N1, N2)
Slice = WorksheetFunction.Index(VArray, 1, Indices)
End If
End Function
للاختبار
Var V As Variant
V = Fill(100,109)
PrintArr(Slice(V,3,5))
'************************************************
'* PrintArr(VArr)
'* Print the array VARR
'**************************************************
Function PrintArr(VArray As Variant)
Dim S As String
S = Join(VArray, ", ")
MsgBox (S)
End Function
النتائج
102, 103, 104