Datum Arithmetik in Unix-shell-Skripte
Frage
Ich muss Datum Arithmetik in Unix-shell-Skripte, die ich verwenden, um die Ausführung der Programme von Drittanbietern.
Ich bin mit einer Funktion zum Inkrement einen Tag und andere zu verringern:
IncrementaDia(){
echo $1 | awk '
BEGIN {
diasDelMes[1] = 31
diasDelMes[2] = 28
diasDelMes[3] = 31
diasDelMes[4] = 30
diasDelMes[5] = 31
diasDelMes[6] = 30
diasDelMes[7] = 31
diasDelMes[8] = 31
diasDelMes[9] = 30
diasDelMes[10] = 31
diasDelMes[11] = 30
diasDelMes[12] = 31
}
{
anio=substr($1,1,4)
mes=substr($1,5,2)
dia=substr($1,7,2)
if((anio % 4 == 0 && anio % 100 != 0) || anio % 400 == 0)
{
diasDelMes[2] = 29;
}
if( dia == diasDelMes[int(mes)] ) {
if( int(mes) == 12 ) {
anio = anio + 1
mes = 1
dia = 1
} else {
mes = mes + 1
dia = 1
}
} else {
dia = dia + 1
}
}
END {
printf("%04d%02d%02d", anio, mes, dia)
}
'
}
if [ $# -eq 1 ]; then
tomorrow=$1
else
today=$(date +"%Y%m%d")
tomorrow=$(IncrementaDia $hoy)
fi
aber jetzt brauche ich zu tun mehr komplexe Arithmetik.
Was es ist das beste und mehr kompatibel Weg, dies zu tun?
Lösung
Ich habe geschrieben, ein bash-Skript zum konvertieren von Daten, ausgedrückt in Englisch in den konventionellen mm/dd/yyyy dates.Es heißt ComputeDate.
Hier sind einige Beispiele für deren Verwendung.Der Kürze halber habe ich platziert die Ausgabe jedes Aufrufs auf der gleichen Linie wie der Aufruf, separarted von einem Doppelpunkt (:).Die Zitate, die unten gezeigt werden nicht erforderlich, beim ausführen ComputeDate:
$ ComputeDate 'yesterday': 03/19/2010
$ ComputeDate 'yes': 03/19/2010
$ ComputeDate 'today': 03/20/2010
$ ComputeDate 'tod': 03/20/2010
$ ComputeDate 'now': 03/20/2010
$ ComputeDate 'tomorrow': 03/21/2010
$ ComputeDate 'tom': 03/21/2010
$ ComputeDate '10/29/32': 10/29/2032
$ ComputeDate 'October 29': 10/1/2029
$ ComputeDate 'October 29, 2010': 10/29/2010
$ ComputeDate 'this monday': 'this monday' has passed. Did you mean 'next monday?'
$ ComputeDate 'a week after today': 03/27/2010
$ ComputeDate 'this satu': 03/20/2010
$ ComputeDate 'next monday': 03/22/2010
$ ComputeDate 'next thur': 03/25/2010
$ ComputeDate 'mon in 2 weeks': 03/28/2010
$ ComputeDate 'the last day of the month': 03/31/2010
$ ComputeDate 'the last day of feb': 2/28/2010
$ ComputeDate 'the last day of feb 2000': 2/29/2000
$ ComputeDate '1 week from yesterday': 03/26/2010
$ ComputeDate '1 week from today': 03/27/2010
$ ComputeDate '1 week from tomorrow': 03/28/2010
$ ComputeDate '2 weeks from yesterday': 4/2/2010
$ ComputeDate '2 weeks from today': 4/3/2010
$ ComputeDate '2 weeks from tomorrow': 4/4/2010
$ ComputeDate '1 week after the last day of march': 4/7/2010
$ ComputeDate '1 week after next Thursday': 4/1/2010
$ ComputeDate '2 weeks after the last day of march': 4/14/2010
$ ComputeDate '2 weeks after 1 day after the last day of march': 4/15/2010
$ ComputeDate '1 day after the last day of march': 4/1/2010
$ ComputeDate '1 day after 1 day after 1 day after 1 day after today': 03/24/2010
Ich habe dieses Skript als eine Antwort auf dieses problem, weil es zeigt, wie zu tun Datum Arithmetik über eine Reihe von bash-Funktionen und diese Funktionen können sich als nützlich erweisen für andere.Es verarbeitet Schaltjahre und Sprung Jahrhunderte richtig:
#! /bin/bash
# ConvertDate -- convert a human-readable date to a MM/DD/YY date
#
# Date ::= Month/Day/Year
# | Month/Day
# | DayOfWeek
# | [this|next] DayOfWeek
# | DayofWeek [of|in] [Number|next] weeks[s]
# | Number [day|week][s] from Date
# | the last day of the month
# | the last day of Month
#
# Month ::= January | February | March | April | May | ... | December
# January ::= jan | january | 1
# February ::= feb | january | 2
# ...
# December ::= dec | december | 12
# Day ::= 1 | 2 | ... | 31
# DayOfWeek ::= today | Sunday | Monday | Tuesday | ... | Saturday
# Sunday ::= sun*
# ...
# Saturday ::= sat*
#
# Number ::= Day | a
#
# Author: Larry Morell
if [ $# = 0 ]; then
printdirections $0
exit
fi
# Request the value of a variable
GetVar () {
Var=$1
echo -n "$Var= [${!Var}]: "
local X
read X
if [ ! -z $X ]; then
eval $Var="$X"
fi
}
IsLeapYear () {
local Year=$1
if [ $[20$Year % 4] -eq 0 ]; then
echo yes
else
echo no
fi
}
# AddToDate -- compute another date within the same year
DayNames=(mon tue wed thu fri sat sun ) # To correspond with 'date' output
Day2Int () {
ErrorFlag=
case $1 in
-e )
ErrorFlag=-e; shift
;;
esac
local dow=$1
n=0
while [ $n -lt 7 -a $dow != "${DayNames[n]}" ]; do
let n++
done
if [ -z "$ErrorFlag" -a $n -eq 7 ]; then
echo Cannot convert $dow to a numeric day of wee
exit
fi
echo $[n+1]
}
Months=(31 28 31 30 31 30 31 31 30 31 30 31)
MonthNames=(jan feb mar apr may jun jul aug sep oct nov dec)
# Returns the month (1-12) from a date, or a month name
Month2Int () {
ErrorFlag=
case $1 in
-e )
ErrorFlag=-e; shift
;;
esac
M=$1
Month=${M%%/*} # Remove /...
case $Month in
[a-z]* )
Month=${Month:0:3}
M=0
while [ $M -lt 12 -a ${MonthNames[M]} != $Month ]; do
let M++
done
let M++
esac
if [ -z "$ErrorFlag" -a $M -gt 12 ]; then
echo "'$Month' Is not a valid month."
exit
fi
echo $M
}
# Retrieve month,day,year from a legal date
GetMonth() {
echo ${1%%/*}
}
GetDay() {
echo $1 | col / 2
}
GetYear() {
echo ${1##*/}
}
AddToDate() {
local Date=$1
local days=$2
local Month=`GetMonth $Date`
local Day=`echo $Date | col / 2` # Day of Date
local Year=`echo $Date | col / 3` # Year of Date
local LeapYear=`IsLeapYear $Year`
if [ $LeapYear = "yes" ]; then
let Months[1]++
fi
Day=$[Day+days]
while [ $Day -gt ${Months[$Month-1]} ]; do
Day=$[Day - ${Months[$Month-1]}]
let Month++
done
echo "$Month/$Day/$Year"
}
# Convert a date to normal form
NormalizeDate () {
Date=`echo "$*" | sed 'sX *X/Xg'`
local Day=`date +%d`
local Month=`date +%m`
local Year=`date +%Y`
#echo Normalizing Date=$Date > /dev/tty
case $Date in
*/*/* )
Month=`echo $Date | col / 1 `
Month=`Month2Int $Month`
Day=`echo $Date | col / 2`
Year=`echo $Date | col / 3`
;;
*/* )
Month=`echo $Date | col / 1 `
Month=`Month2Int $Month`
Day=1
Year=`echo $Date | col / 2 `
;;
[a-z]* ) # Better be a month or day of week
Exp=${Date:0:3}
case $Exp in
jan|feb|mar|apr|may|june|jul|aug|sep|oct|nov|dec )
Month=$Exp
Month=`Month2Int $Month`
Day=1
#Year stays the same
;;
mon|tue|wed|thu|fri|sat|sun )
# Compute the next such day
local DayOfWeek=`date +%u`
D=`Day2Int $Exp`
if [ $DayOfWeek -le $D ]; then
Date=`AddToDate $Month/$Day/$Year $[D-DayOfWeek]`
else
Date=`AddToDate $Month/$Day/$Year $[7+D-DayOfWeek]`
fi
# Reset Month/Day/Year
Month=`echo $Date | col / 1 `
Day=`echo $Date | col / 2`
Year=`echo $Date | col / 3`
;;
* ) echo "$Exp is not a valid month or day"
exit
;;
esac
;;
* ) echo "$Date is not a valid date"
exit
;;
esac
case $Day in
[0-9]* );; # Day must be numeric
* ) echo "$Date is not a valid date"
exit
;;
esac
[0-9][0-9][0-9][0-9] );; # Year must be 4 digits
[0-9][0-9] )
Year=20$Year
;;
esac
Date=$Month/$Day/$Year
echo $Date
}
# NormalizeDate jan
# NormalizeDate january
# NormalizeDate jan 2009
# NormalizeDate jan 22 1983
# NormalizeDate 1/22
# NormalizeDate 1 22
# NormalizeDate sat
# NormalizeDate sun
# NormalizeDate mon
ComputeExtension () {
local Date=$1; shift
local Month=`GetMonth $Date`
local Day=`echo $Date | col / 2`
local Year=`echo $Date | col / 3`
local ExtensionExp="$*"
case $ExtensionExp in
*w*d* ) # like 5 weeks 3 days or even 5w2d
ExtensionExp=`echo $ExtensionExp | sed 's/[a-z]/ /g'`
weeks=`echo $ExtensionExp | col 1`
days=`echo $ExtensionExp | col 2`
days=$[7*weeks+days]
Due=`AddToDate $Month/$Day/$Year $days`
;;
*d ) # Like 5 days or 5d
ExtensionExp=`echo $ExtensionExp | sed 's/[a-z]/ /g'`
days=$ExtensionExp
Due=`AddToDate $Month/$Day/$Year $days`
;;
* )
Due=$ExtensionExp
;;
esac
echo $Due
}
# Pop -- remove the first element from an array and shift left
Pop () {
Var=$1
eval "unset $Var[0]"
eval "$Var=(\${$Var[*]})"
}
ComputeDate () {
local Date=`NormalizeDate $1`; shift
local Expression=`echo $* | sed 's/^ *a /1 /;s/,/ /' | tr A-Z a-z `
local Exp=(`echo $Expression `)
local Token=$Exp # first one
local Ans=
#echo "Computing date for ${Exp[*]}" > /dev/tty
case $Token in
*/* ) # Regular date
M=`GetMonth $Token`
D=`GetDay $Token`
Y=`GetYear $Token`
if [ -z "$Y" ]; then
Y=$Year
elif [ ${#Y} -eq 2 ]; then
Y=20$Y
fi
Ans="$M/$D/$Y"
;;
yes* )
Ans=`AddToDate $Date -1`
;;
tod*|now )
Ans=$Date
;;
tom* )
Ans=`AddToDate $Date 1`
;;
the )
case $Expression in
*day*after* ) #the day after Date
Pop Exp; # Skip the
Pop Exp; # Skip day
Pop Exp; # Skip after
#echo Calling ComputeDate $Date ${Exp[*]} > /dev/tty
Date=`ComputeDate $Date ${Exp[*]}` #Recursive call
#echo "New date is " $Date > /dev/tty
Ans=`AddToDate $Date 1`
;;
*last*day*of*th*month|*end*of*th*month )
M=`date +%m`
Day=${Months[M-1]}
if [ $M -eq 2 -a `IsLeapYear $Year` = yes ]; then
let Day++
fi
Ans=$Month/$Day/$Year
;;
*last*day*of* )
D=${Expression##*of }
D=`NormalizeDate $D`
M=`GetMonth $D`
Y=`GetYear $D`
# echo M is $M > /dev/tty
Day=${Months[M-1]}
if [ $M -eq 2 -a `IsLeapYear $Y` = yes ]; then
let Day++
fi
Ans=$[M]/$Day/$Y
;;
* )
echo "Unknown expression: " $Expression
exit
;;
esac
;;
next* ) # next DayOfWeek
Pop Exp
dow=`Day2Int $DayOfWeek` # First 3 chars
tdow=`Day2Int ${Exp:0:3}` # First 3 chars
n=$[7-dow+tdow]
Ans=`AddToDate $Date $n`
;;
this* )
Pop Exp
dow=`Day2Int $DayOfWeek`
tdow=`Day2Int ${Exp:0:3}` # First 3 chars
if [ $dow -gt $tdow ]; then
echo "'this $Exp' has passed. Did you mean 'next $Exp?'"
exit
fi
n=$[tdow-dow]
Ans=`AddToDate $Date $n`
;;
[a-z]* ) # DayOfWeek ...
M=${Exp:0:3}
case $M in
jan|feb|mar|apr|may|june|jul|aug|sep|oct|nov|dec )
ND=`NormalizeDate ${Exp[*]}`
Ans=$ND
;;
mon|tue|wed|thu|fri|sat|sun )
dow=`Day2Int $DayOfWeek`
Ans=`NormalizeDate $Exp`
if [ ${#Exp[*]} -gt 1 ]; then # Just a DayOfWeek
#tdow=`GetDay $Exp` # First 3 chars
#if [ $dow -gt $tdow ]; then
#echo "'this $Exp' has passed. Did you mean 'next $Exp'?"
#exit
#fi
#n=$[tdow-dow]
#else # DayOfWeek in a future week
Pop Exp # toss monday
Pop Exp # toss in/off
if [ $Exp = next ]; then
Exp=2
fi
n=$[7*(Exp-1)] # number of weeks
n=$[n+7-dow+tdow]
Ans=`AddToDate $Date $n`
fi
;;
esac
;;
[0-9]* ) # Number weeks [from|after] Date
n=$Exp
Pop Exp;
case $Exp in
w* ) let n=7*n;;
esac
Pop Exp; Pop Exp
#echo Calling ComputeDate $Date ${Exp[*]} > /dev/tty
Date=`ComputeDate $Date ${Exp[*]}` #Recursive call
#echo "New date is " $Date > /dev/tty
Ans=`AddToDate $Date $n`
;;
esac
echo $Ans
}
Year=`date +%Y`
Month=`date +%m`
Day=`date +%d`
DayOfWeek=`date +%a |tr A-Z a-z`
Date="$Month/$Day/$Year"
ComputeDate $Date $*
Dieses Skript nutzt ein anderes Skript, das ich schrieb (genannt col ...viele Entschuldigungen an diejenigen, die die standard - col geliefert mit Linux).Diese version von col vereinfacht das extrahieren von Spalten aus der Standardeingabe.So
$ echo a b c d e | col 5 3 2
Drucke
e c b
Hier ist es die col script:
#!/bin/sh
# col -- extract columns from a file
# Usage:
# col [-r] [c] col-1 col-2 ...
# where [c] if supplied defines the field separator
# where each col-i represents a column interpreted according to the presence of -r as follows:
# -r present : counting starts from the right end of the line
# -r absent : counting starts from the left side of the line
Separator=" "
Reverse=false
case "$1" in
-r ) Reverse=true; shift;
;;
[0-9]* )
;;
* )Separator="$1"; shift;
;;
esac
case "$1" in
-r ) Reverse=true; shift;
;;
[0-9]* )
;;
* )Separator="$1"; shift;
;;
esac
# Replace each col-i with $i
Cols=""
for f in $*
do
if [ $Reverse = true ]; then
Cols="$Cols \$(NF-$f+1),"
else
Cols="$Cols \$$f,"
fi
done
Cols=`echo "$Cols" | sed 's/,$//'`
#echo "Using column specifications of $Cols"
awk -F "$Separator" "{print $Cols}"
Es auch nutzt printdirections für den Druck von Schildern, wenn das Skript aufgerufen wird, nicht ordnungsgemäß:
#!/bin/sh
#
# printdirections -- print header lines of a shell script
#
# Usage:
# printdirections path
# where
# path is a *full* path to the shell script in question
# beginning with '/'
#
# To use printdirections, you must include (as comments at the top
# of your shell script) documentation for running the shell script.
if [ $# -eq 0 -o "$*" = "-h" ]; then
printdirections $0
exit
fi
# Delete the command invocation at the top of the file, if any
# Delete from the place where printdirections occurs to the end of the file
# Remove the # comments
# There is a bizarre oddity here.
sed '/#!/d;/.*printdirections/,$d;/ *#/!d;s/# //;s/#//' $1 > /tmp/printdirections.$$
# Count the number of lines
numlines=`wc -l /tmp/printdirections.$$ | awk '{print $1}'`
# Remove the last line
numlines=`expr $numlines - 1`
head -n $numlines /tmp/printdirections.$$
rm /tmp/printdirections.$$
Um diesen Platz der drei scripts in den Dateien ComputeDate, col, und printdirections, beziehungsweise.Platzieren Sie die Datei im Verzeichnis mit dem Namen von Ihrem PFAD, normalerweise ~/bin.Dann machen Sie Sie ausführbar mit:
$ chmod a+x ComputeDate col printdirections
Probleme?Senden Sie mir eine E-Mail:morell AN cs.atu.edu Ort ComputeDate in der Betreffzeile.
Andere Tipps
Hier ist eine einfache Möglichkeit, zu tun Datum Berechnungen in shell scripting.
meetingDate='12/31/2011' # MM/DD/YYYY Format
reminderDate=`date --date=$meetingDate'-1 day' +'%m/%d/%Y'`
echo $reminderDate
Im folgenden werden weitere Varianten von Datum, Berechnung, dass können erreicht werden durch date
utility.http://www.cyberciti.biz/tips/linux-unix-get-yesterdays-tomorrows-date.html
http://www.cyberciti.biz/faq/linux-unix-formatting-dates-for-display/
Dies funktionierte für mich auf RHEL.
BSD / OS-X-Kompatibilität, Sie können auch die Datum-Dienstprogramm mit -j
und -v
zu tun Datum Mathe.Siehe die FreeBSD-manpage für Datum.Sie kombinieren könnte der vorherigen Linux-Antworten mit dieser Antwort, die möglicherweise bieten Sie mit ausreichende Kompatibilität.
Auf BSD, Linux, laufen date
geben Sie das aktuelle Datum:
$ date
Wed 12 Nov 2014 13:36:00 AEDT
Jetzt mit BSD-Datum, das Sie tun können Mathematik mit -v
, zum Beispiel Auflistung von morgen Datum (+1d
ist plus einen Tag):
$ date -v +1d
Thu 13 Nov 2014 13:36:34 AEDT
Sie können eine vorhandene Datum als Basis, und geben Optional die parse-format strftime, und stellen Sie sicher, dass Sie -j
damit Sie nicht ändern Sie Ihre system-Datum:
$ date -j -f "%a %b %d %H:%M:%S %Y %z" "Sat Aug 09 13:37:14 2014 +1100"
Sat 9 Aug 2014 12:37:14 AEST
Und Sie können diese als Basis von Datum-Berechnungen:
$ date -v +1d -f "%a %b %d %H:%M:%S %Y %z" "Sat Aug 09 13:37:14 2014 +1100"
Sun 10 Aug 2014 12:37:14 AEST
Beachten Sie, dass -v
impliziert -j
.
Mehrere Einstellungen können zur Verfügung gestellt werden sequenziell:
$ date -v +1m -v -1w
Fri 5 Dec 2014 13:40:07 AEDT
Siehe die manpage für weitere details.
Zum rechnen mit Datumsangaben, die auf UNIX-Sie bekommen das Datum als Anzahl von Sekunden seit der UNIX-Epoche, einige Berechnung, dann konvertieren Sie Sie zurück zu Ihrem druckbar-Datum-format.Der date-Befehl sollte in der Lage sein zu geben Sie die Sekunden seit der Epoche und konvertieren von dieser Nummer zurück, um eine druckbare Datum.Mein lokales Datum Befehl wird,
% date -n
1219371462
% date 1219371462
Thu Aug 21 22:17:42 EDT 2008
%
Sehen Sie Ihre lokale date(1)
man-Seite.Inkrementieren einen Tag hinzuzufügen 86400 Sekunden.
Warum schreiben Sie nicht Ihre Skripte mit einer Sprache wie perl oder python statt, die natürlich mehr unterstützt komplexe Datenverarbeitung?Sie sicher, dass Sie können tun Sie es alle in bash, aber ich denke, Sie bekommen auch mehr Konsistenz über Plattformen mit python für Beispiel, so lange wie Sie sicherstellen können, dass perl oder python installiert ist.
Ich sollte hinzufügen, dass, es ist ziemlich einfach zu Draht in python-und perl-Skripte in eine mit shell-Skript.
Ich rempelte ein paar mal.Meine Gedanken sind:
- Datum Arithmetik ist immer ein Schmerz
- Es ist ein bisschen einfacher, wenn mit EPOCHE-Datum-format
- Datum auf Linux konvertiert EPOCHE, aber nicht auf Solaris
- Für eine tragbare Lösung, die Sie benötigen, um führen Sie einen der folgenden Schritte aus:
- Installieren Sie gnu Datum auf solaris (bereits erwähnt, muss die menschliche Interaktion abgeschlossen ist)
- Verwenden Sie perl für den Teil des Datums (die meisten unix-Installationen enthalten perl, so würde ich in der Regel davon ausgehen, dass diese Aktion nicht nicht erfordern zusätzliche Arbeit).
Ein Beispiel-Skript (Prüfungen für das Alter von bestimmten Dateien der Benutzer, um zu sehen, wenn das Konto gelöscht werden können):
#!/usr/local/bin/perl
$today = time();
$user = $ARGV[0];
$command="awk -F: '/$user/ {print \$6}' /etc/passwd";
chomp ($user_dir = `$command`);
if ( -f "$user_dir/.sh_history" ) {
@file_dates = stat("$user_dir/.sh_history");
$sh_file_date = $file_dates[8];
} else {
$sh_file_date = 0;
}
if ( -f "$user_dir/.bash_history" ) {
@file_dates = stat("$user_dir/.bash_history");
$bash_file_date = $file_dates[8];
} else {
$bash_file_date = 0;
}
if ( $sh_file_date > $bash_file_date ) {
$file_date = $sh_file_date;
} else {
$file_date = $bash_file_date;
}
$difference = $today - $file_date;
if ( $difference >= 3888000 ) {
print "User needs to be disabled, 45 days old or older!\n";
exit (1);
} else {
print "OK\n";
exit (0);
}
date --date='1 days ago' '+%a'
Es ist nicht sehr kompatibel Lösung.Es funktioniert nur unter Linux.Mindestens, es hat nicht geklappt in Aix und Solaris.
Es funktioniert in RHEL:
date --date='1 days ago' '+%Y%m%d'
20080807
Suchen in es weiter, ich denke, Sie können verwenden Sie einfach Datum.Ich habe versucht, die folgenden auf OpenBSD:Ich nahm das Datum Feb.29th 2008 und einer zufälligen Stunde (in form von 080229301535) und +1 an dem Tag Teil, etwa so:
$ date -j 0802301535
Sat Mar 1 15:35:00 EST 2008
Wie Sie sehen können, formatiertes Datum, die Zeit richtig zu...
HTH
Wenn Sie wollen, um weiterhin mit awk, dann die mktime und strftime Funktionen sind nützlich:
BEGIN { dateinit }
{ newdate=daysadd(OldDate,DaysToAdd)}
# daynum: convert DD-MON-YYYY to day count
#-----------------------------------------
function daynum(date, d,m,y,i,n)
{
y=substr(date,8,4)
m=gmonths[toupper(substr(date,4,3))]
d=substr(date,1,2)
return mktime(y" "m" "d" 12 00 00")
}
#numday: convert day count to DD-MON-YYYY
#-------------------------------------------
function numday(n, y,m,d)
{
m=toupper(substr(strftime("%B",n),1,3))
return strftime("%d-"m"-%Y",n)
}
# daysadd: add (or subtract) days from date (DD-MON-YYYY), return new date (DD-MON-YYYY)
#------------------------------------------
function daysadd(date, days)
{
return numday(daynum(date)+(days*86400))
}
#init variables for date calcs
#-----------------------------------------
function dateinit( x,y,z)
{
# Stuff for date calcs
split("JAN:1,FEB:2,MAR:3,APR:4,MAY:5,JUN:6,JUL:7,AUG:8,SEP:9,OCT:10,NOV:11,DEC:12", z)
for (x in z)
{
split(z[x],y,":")
gmonths[y[1]]=y[2]
}
}
Das Buch "Shell-Skript Rezepte:Ein Problem Lösung Ansatz" (ISBN:978-1-59059-471-1) von Chris F. A.Johnson hat ein Datum-Funktionen-Bibliothek, die hilfreich sein könnten.Der source-code ist erhältlich bei http://apress.com/book/downloadfile/2146 (die Datum-Funktionen sind in Chapter08/Daten-funcs-sh innerhalb der tar-Datei).
Wenn Sie die GNU-version Datum für Sie funktioniert, warum nicht schnappen Sie die Quelle und kompilieren Sie es auf AIX und Solaris?
http://www.gnu.org/software/coreutils/
In jedem Fall, die Quelle sollte, um Ihnen zu helfen Holen Sie sich die Datums-Arithmetik korrekt ist, wenn Sie schreiben werden, Sie eigenen code.
Als ein beiseite, Kommentare wie "diese Lösung ist gut, aber sicherlich können Sie Hinweis es ist nicht so gut, wie sein kann.Es scheint niemand dachte, basteln mit Terminen beim Aufbau von Unix." nicht wirklich um uns überall.Ich fand jeweils die Vorschläge, die bisher auf sehr nützlich sein und am Ziel.
Hier sind meine zwei Pfennige Wert - einen Skript-wrapper nutzen date
und grep
.
Beispiel Der Verwendung
> sh ./datecalc.sh "2012-08-04 19:43:00" + 1s
2012-08-04 19:43:00 + 0d0h0m1s
2012-08-04 19:43:01
> sh ./datecalc.sh "2012-08-04 19:43:00" - 1s1m1h1d
2012-08-04 19:43:00 - 1d1h1m1s
2012-08-03 18:41:59
> sh ./datecalc.sh "2012-08-04 19:43:00" - 1d2d1h2h1m2m1s2sblahblah
2012-08-04 19:43:00 - 1d1h1m1s
2012-08-03 18:41:59
> sh ./datecalc.sh "2012-08-04 19:43:00" x 1d
Bad operator :-(
> sh ./datecalc.sh "2012-08-04 19:43:00"
Missing arguments :-(
> sh ./datecalc.sh gibberish + 1h
date: invalid date `gibberish'
Invalid date :-(
Skript
#!/bin/sh
# Usage:
#
# datecalc "<date>" <operator> <period>
#
# <date> ::= see "man date", section "DATE STRING"
# <operator> ::= + | -
# <period> ::= INTEGER<unit> | INTEGER<unit><period>
# <unit> ::= s | m | h | d
if [ $# -lt 3 ]; then
echo "Missing arguments :-("
exit; fi
date=`eval "date -d \"$1\" +%s"`
if [ -z $date ]; then
echo "Invalid date :-("
exit; fi
if ! ([ $2 == "-" ] || [ $2 == "+" ]); then
echo "Bad operator :-("
exit; fi
op=$2
minute=$[60]
hour=$[$minute*$minute]
day=$[24*$hour]
s=`echo $3 | grep -oe '[0-9]*s' | grep -m 1 -oe '[0-9]*'`
m=`echo $3 | grep -oe '[0-9]*m' | grep -m 1 -oe '[0-9]*'`
h=`echo $3 | grep -oe '[0-9]*h' | grep -m 1 -oe '[0-9]*'`
d=`echo $3 | grep -oe '[0-9]*d' | grep -m 1 -oe '[0-9]*'`
if [ -z $s ]; then s=0; fi
if [ -z $m ]; then m=0; fi
if [ -z $h ]; then h=0; fi
if [ -z $d ]; then d=0; fi
ms=$[$m*$minute]
hs=$[$h*$hour]
ds=$[$d*$day]
sum=$[$s+$ms+$hs+$ds]
out=$[$date$op$sum]
formattedout=`eval "date -d @$out +\"%Y-%m-%d %H:%M:%S\""`
echo $1 $2 $d"d"$h"h"$m"m"$s"s"
echo $formattedout
Dies funktioniert für mich:
TZ=GMT+6;
export TZ
mes=`date --date='2 days ago' '+%m'`
dia=`date --date='2 days ago' '+%d'`
anio=`date --date='2 days ago' '+%Y'`
hora=`date --date='2 days ago' '+%H'`