Unix シェル スクリプトでの日付演算
質問
サードパーティ プログラムの実行を制御するために使用する Unix シェル スクリプトで日付の計算を行う必要があります。
日を増やす関数と減分する関数を使用しています。
IncrementaDia(){
echo $1 | awk '
BEGIN {
diasDelMes[1] = 31
diasDelMes[2] = 28
diasDelMes[3] = 31
diasDelMes[4] = 30
diasDelMes[5] = 31
diasDelMes[6] = 30
diasDelMes[7] = 31
diasDelMes[8] = 31
diasDelMes[9] = 30
diasDelMes[10] = 31
diasDelMes[11] = 30
diasDelMes[12] = 31
}
{
anio=substr($1,1,4)
mes=substr($1,5,2)
dia=substr($1,7,2)
if((anio % 4 == 0 && anio % 100 != 0) || anio % 400 == 0)
{
diasDelMes[2] = 29;
}
if( dia == diasDelMes[int(mes)] ) {
if( int(mes) == 12 ) {
anio = anio + 1
mes = 1
dia = 1
} else {
mes = mes + 1
dia = 1
}
} else {
dia = dia + 1
}
}
END {
printf("%04d%02d%02d", anio, mes, dia)
}
'
}
if [ $# -eq 1 ]; then
tomorrow=$1
else
today=$(date +"%Y%m%d")
tomorrow=$(IncrementaDia $hoy)
fi
しかし、今度はより複雑な算術を行う必要があります。
これを行うための最良かつより互換性のある方法は何でしょうか?
解決
英語で表現された日付を従来のMM/DD/YYYY日付に変換するためのBASHスクリプトを書きました。いわゆる 計算日.
ここではその使用例をいくつか紹介します。簡潔にするために、私は各呼び出しの出力を、コロン(:)によって分離された呼び出しと同じ線に配置しました。以下に示されている引用は、 ない 走るときに必要な 計算日:
$ ComputeDate 'yesterday': 03/19/2010
$ ComputeDate 'yes': 03/19/2010
$ ComputeDate 'today': 03/20/2010
$ ComputeDate 'tod': 03/20/2010
$ ComputeDate 'now': 03/20/2010
$ ComputeDate 'tomorrow': 03/21/2010
$ ComputeDate 'tom': 03/21/2010
$ ComputeDate '10/29/32': 10/29/2032
$ ComputeDate 'October 29': 10/1/2029
$ ComputeDate 'October 29, 2010': 10/29/2010
$ ComputeDate 'this monday': 'this monday' has passed. Did you mean 'next monday?'
$ ComputeDate 'a week after today': 03/27/2010
$ ComputeDate 'this satu': 03/20/2010
$ ComputeDate 'next monday': 03/22/2010
$ ComputeDate 'next thur': 03/25/2010
$ ComputeDate 'mon in 2 weeks': 03/28/2010
$ ComputeDate 'the last day of the month': 03/31/2010
$ ComputeDate 'the last day of feb': 2/28/2010
$ ComputeDate 'the last day of feb 2000': 2/29/2000
$ ComputeDate '1 week from yesterday': 03/26/2010
$ ComputeDate '1 week from today': 03/27/2010
$ ComputeDate '1 week from tomorrow': 03/28/2010
$ ComputeDate '2 weeks from yesterday': 4/2/2010
$ ComputeDate '2 weeks from today': 4/3/2010
$ ComputeDate '2 weeks from tomorrow': 4/4/2010
$ ComputeDate '1 week after the last day of march': 4/7/2010
$ ComputeDate '1 week after next Thursday': 4/1/2010
$ ComputeDate '2 weeks after the last day of march': 4/14/2010
$ ComputeDate '2 weeks after 1 day after the last day of march': 4/15/2010
$ ComputeDate '1 day after the last day of march': 4/1/2010
$ ComputeDate '1 day after 1 day after 1 day after 1 day after today': 03/24/2010
このスクリプトをこの問題への答えとして含めました。なぜなら、一連のbash関数を介して日付算術を行う方法を示しているため、これらの関数は他の人にとって有用であることが証明される可能性があるためです。閏年と閏世紀を正しく処理します。
#! /bin/bash
# ConvertDate -- convert a human-readable date to a MM/DD/YY date
#
# Date ::= Month/Day/Year
# | Month/Day
# | DayOfWeek
# | [this|next] DayOfWeek
# | DayofWeek [of|in] [Number|next] weeks[s]
# | Number [day|week][s] from Date
# | the last day of the month
# | the last day of Month
#
# Month ::= January | February | March | April | May | ... | December
# January ::= jan | january | 1
# February ::= feb | january | 2
# ...
# December ::= dec | december | 12
# Day ::= 1 | 2 | ... | 31
# DayOfWeek ::= today | Sunday | Monday | Tuesday | ... | Saturday
# Sunday ::= sun*
# ...
# Saturday ::= sat*
#
# Number ::= Day | a
#
# Author: Larry Morell
if [ $# = 0 ]; then
printdirections $0
exit
fi
# Request the value of a variable
GetVar () {
Var=$1
echo -n "$Var= [${!Var}]: "
local X
read X
if [ ! -z $X ]; then
eval $Var="$X"
fi
}
IsLeapYear () {
local Year=$1
if [ $[20$Year % 4] -eq 0 ]; then
echo yes
else
echo no
fi
}
# AddToDate -- compute another date within the same year
DayNames=(mon tue wed thu fri sat sun ) # To correspond with 'date' output
Day2Int () {
ErrorFlag=
case $1 in
-e )
ErrorFlag=-e; shift
;;
esac
local dow=$1
n=0
while [ $n -lt 7 -a $dow != "${DayNames[n]}" ]; do
let n++
done
if [ -z "$ErrorFlag" -a $n -eq 7 ]; then
echo Cannot convert $dow to a numeric day of wee
exit
fi
echo $[n+1]
}
Months=(31 28 31 30 31 30 31 31 30 31 30 31)
MonthNames=(jan feb mar apr may jun jul aug sep oct nov dec)
# Returns the month (1-12) from a date, or a month name
Month2Int () {
ErrorFlag=
case $1 in
-e )
ErrorFlag=-e; shift
;;
esac
M=$1
Month=${M%%/*} # Remove /...
case $Month in
[a-z]* )
Month=${Month:0:3}
M=0
while [ $M -lt 12 -a ${MonthNames[M]} != $Month ]; do
let M++
done
let M++
esac
if [ -z "$ErrorFlag" -a $M -gt 12 ]; then
echo "'$Month' Is not a valid month."
exit
fi
echo $M
}
# Retrieve month,day,year from a legal date
GetMonth() {
echo ${1%%/*}
}
GetDay() {
echo $1 | col / 2
}
GetYear() {
echo ${1##*/}
}
AddToDate() {
local Date=$1
local days=$2
local Month=`GetMonth $Date`
local Day=`echo $Date | col / 2` # Day of Date
local Year=`echo $Date | col / 3` # Year of Date
local LeapYear=`IsLeapYear $Year`
if [ $LeapYear = "yes" ]; then
let Months[1]++
fi
Day=$[Day+days]
while [ $Day -gt ${Months[$Month-1]} ]; do
Day=$[Day - ${Months[$Month-1]}]
let Month++
done
echo "$Month/$Day/$Year"
}
# Convert a date to normal form
NormalizeDate () {
Date=`echo "$*" | sed 'sX *X/Xg'`
local Day=`date +%d`
local Month=`date +%m`
local Year=`date +%Y`
#echo Normalizing Date=$Date > /dev/tty
case $Date in
*/*/* )
Month=`echo $Date | col / 1 `
Month=`Month2Int $Month`
Day=`echo $Date | col / 2`
Year=`echo $Date | col / 3`
;;
*/* )
Month=`echo $Date | col / 1 `
Month=`Month2Int $Month`
Day=1
Year=`echo $Date | col / 2 `
;;
[a-z]* ) # Better be a month or day of week
Exp=${Date:0:3}
case $Exp in
jan|feb|mar|apr|may|june|jul|aug|sep|oct|nov|dec )
Month=$Exp
Month=`Month2Int $Month`
Day=1
#Year stays the same
;;
mon|tue|wed|thu|fri|sat|sun )
# Compute the next such day
local DayOfWeek=`date +%u`
D=`Day2Int $Exp`
if [ $DayOfWeek -le $D ]; then
Date=`AddToDate $Month/$Day/$Year $[D-DayOfWeek]`
else
Date=`AddToDate $Month/$Day/$Year $[7+D-DayOfWeek]`
fi
# Reset Month/Day/Year
Month=`echo $Date | col / 1 `
Day=`echo $Date | col / 2`
Year=`echo $Date | col / 3`
;;
* ) echo "$Exp is not a valid month or day"
exit
;;
esac
;;
* ) echo "$Date is not a valid date"
exit
;;
esac
case $Day in
[0-9]* );; # Day must be numeric
* ) echo "$Date is not a valid date"
exit
;;
esac
[0-9][0-9][0-9][0-9] );; # Year must be 4 digits
[0-9][0-9] )
Year=20$Year
;;
esac
Date=$Month/$Day/$Year
echo $Date
}
# NormalizeDate jan
# NormalizeDate january
# NormalizeDate jan 2009
# NormalizeDate jan 22 1983
# NormalizeDate 1/22
# NormalizeDate 1 22
# NormalizeDate sat
# NormalizeDate sun
# NormalizeDate mon
ComputeExtension () {
local Date=$1; shift
local Month=`GetMonth $Date`
local Day=`echo $Date | col / 2`
local Year=`echo $Date | col / 3`
local ExtensionExp="$*"
case $ExtensionExp in
*w*d* ) # like 5 weeks 3 days or even 5w2d
ExtensionExp=`echo $ExtensionExp | sed 's/[a-z]/ /g'`
weeks=`echo $ExtensionExp | col 1`
days=`echo $ExtensionExp | col 2`
days=$[7*weeks+days]
Due=`AddToDate $Month/$Day/$Year $days`
;;
*d ) # Like 5 days or 5d
ExtensionExp=`echo $ExtensionExp | sed 's/[a-z]/ /g'`
days=$ExtensionExp
Due=`AddToDate $Month/$Day/$Year $days`
;;
* )
Due=$ExtensionExp
;;
esac
echo $Due
}
# Pop -- remove the first element from an array and shift left
Pop () {
Var=$1
eval "unset $Var[0]"
eval "$Var=(\${$Var[*]})"
}
ComputeDate () {
local Date=`NormalizeDate $1`; shift
local Expression=`echo $* | sed 's/^ *a /1 /;s/,/ /' | tr A-Z a-z `
local Exp=(`echo $Expression `)
local Token=$Exp # first one
local Ans=
#echo "Computing date for ${Exp[*]}" > /dev/tty
case $Token in
*/* ) # Regular date
M=`GetMonth $Token`
D=`GetDay $Token`
Y=`GetYear $Token`
if [ -z "$Y" ]; then
Y=$Year
elif [ ${#Y} -eq 2 ]; then
Y=20$Y
fi
Ans="$M/$D/$Y"
;;
yes* )
Ans=`AddToDate $Date -1`
;;
tod*|now )
Ans=$Date
;;
tom* )
Ans=`AddToDate $Date 1`
;;
the )
case $Expression in
*day*after* ) #the day after Date
Pop Exp; # Skip the
Pop Exp; # Skip day
Pop Exp; # Skip after
#echo Calling ComputeDate $Date ${Exp[*]} > /dev/tty
Date=`ComputeDate $Date ${Exp[*]}` #Recursive call
#echo "New date is " $Date > /dev/tty
Ans=`AddToDate $Date 1`
;;
*last*day*of*th*month|*end*of*th*month )
M=`date +%m`
Day=${Months[M-1]}
if [ $M -eq 2 -a `IsLeapYear $Year` = yes ]; then
let Day++
fi
Ans=$Month/$Day/$Year
;;
*last*day*of* )
D=${Expression##*of }
D=`NormalizeDate $D`
M=`GetMonth $D`
Y=`GetYear $D`
# echo M is $M > /dev/tty
Day=${Months[M-1]}
if [ $M -eq 2 -a `IsLeapYear $Y` = yes ]; then
let Day++
fi
Ans=$[M]/$Day/$Y
;;
* )
echo "Unknown expression: " $Expression
exit
;;
esac
;;
next* ) # next DayOfWeek
Pop Exp
dow=`Day2Int $DayOfWeek` # First 3 chars
tdow=`Day2Int ${Exp:0:3}` # First 3 chars
n=$[7-dow+tdow]
Ans=`AddToDate $Date $n`
;;
this* )
Pop Exp
dow=`Day2Int $DayOfWeek`
tdow=`Day2Int ${Exp:0:3}` # First 3 chars
if [ $dow -gt $tdow ]; then
echo "'this $Exp' has passed. Did you mean 'next $Exp?'"
exit
fi
n=$[tdow-dow]
Ans=`AddToDate $Date $n`
;;
[a-z]* ) # DayOfWeek ...
M=${Exp:0:3}
case $M in
jan|feb|mar|apr|may|june|jul|aug|sep|oct|nov|dec )
ND=`NormalizeDate ${Exp[*]}`
Ans=$ND
;;
mon|tue|wed|thu|fri|sat|sun )
dow=`Day2Int $DayOfWeek`
Ans=`NormalizeDate $Exp`
if [ ${#Exp[*]} -gt 1 ]; then # Just a DayOfWeek
#tdow=`GetDay $Exp` # First 3 chars
#if [ $dow -gt $tdow ]; then
#echo "'this $Exp' has passed. Did you mean 'next $Exp'?"
#exit
#fi
#n=$[tdow-dow]
#else # DayOfWeek in a future week
Pop Exp # toss monday
Pop Exp # toss in/off
if [ $Exp = next ]; then
Exp=2
fi
n=$[7*(Exp-1)] # number of weeks
n=$[n+7-dow+tdow]
Ans=`AddToDate $Date $n`
fi
;;
esac
;;
[0-9]* ) # Number weeks [from|after] Date
n=$Exp
Pop Exp;
case $Exp in
w* ) let n=7*n;;
esac
Pop Exp; Pop Exp
#echo Calling ComputeDate $Date ${Exp[*]} > /dev/tty
Date=`ComputeDate $Date ${Exp[*]}` #Recursive call
#echo "New date is " $Date > /dev/tty
Ans=`AddToDate $Date $n`
;;
esac
echo $Ans
}
Year=`date +%Y`
Month=`date +%m`
Day=`date +%d`
DayOfWeek=`date +%a |tr A-Z a-z`
Date="$Month/$Day/$Year"
ComputeDate $Date $*
このスクリプトは、私が作成した別のスクリプト ( コル ...標準を使用している方々には大変申し訳ありませんが、 コル Linux に付属しています)。このバージョンのコル 標準入力からの列の抽出が簡素化されます。したがって、
$ echo a b c d e | col 5 3 2
プリント
e c b
ここにそれは コル 脚本:
#!/bin/sh
# col -- extract columns from a file
# Usage:
# col [-r] [c] col-1 col-2 ...
# where [c] if supplied defines the field separator
# where each col-i represents a column interpreted according to the presence of -r as follows:
# -r present : counting starts from the right end of the line
# -r absent : counting starts from the left side of the line
Separator=" "
Reverse=false
case "$1" in
-r ) Reverse=true; shift;
;;
[0-9]* )
;;
* )Separator="$1"; shift;
;;
esac
case "$1" in
-r ) Reverse=true; shift;
;;
[0-9]* )
;;
* )Separator="$1"; shift;
;;
esac
# Replace each col-i with $i
Cols=""
for f in $*
do
if [ $Reverse = true ]; then
Cols="$Cols \$(NF-$f+1),"
else
Cols="$Cols \$$f,"
fi
done
Cols=`echo "$Cols" | sed 's/,$//'`
#echo "Using column specifications of $Cols"
awk -F "$Separator" "{print $Cols}"
また、 印刷方向 スクリプトが不適切に呼び出されたときに指示を出力する場合:
#!/bin/sh
#
# printdirections -- print header lines of a shell script
#
# Usage:
# printdirections path
# where
# path is a *full* path to the shell script in question
# beginning with '/'
#
# To use printdirections, you must include (as comments at the top
# of your shell script) documentation for running the shell script.
if [ $# -eq 0 -o "$*" = "-h" ]; then
printdirections $0
exit
fi
# Delete the command invocation at the top of the file, if any
# Delete from the place where printdirections occurs to the end of the file
# Remove the # comments
# There is a bizarre oddity here.
sed '/#!/d;/.*printdirections/,$d;/ *#/!d;s/# //;s/#//' $1 > /tmp/printdirections.$$
# Count the number of lines
numlines=`wc -l /tmp/printdirections.$$ | awk '{print $1}'`
# Remove the last line
numlines=`expr $numlines - 1`
head -n $numlines /tmp/printdirections.$$
rm /tmp/printdirections.$$
これを使用するには、ファイル内に 3 つのスクリプトを配置します。 計算日, コル, 、 そして 印刷方向, 、 それぞれ。ファイルを PATH で指定されたディレクトリ (通常は ~/bin) に置きます。次に、次のようにして実行可能にします。
$ chmod a+x ComputeDate col printdirections
問題がありますか?メールを送ってください:モレル AT cs.atu.edu 場所 計算日 件名で。
他のヒント
ここでは、シェル スクリプトで日付の計算を行う簡単な方法を示します。
meetingDate='12/31/2011' # MM/DD/YYYY Format
reminderDate=`date --date=$meetingDate'-1 day' +'%m/%d/%Y'`
echo $reminderDate
以下は、以下を使用して実現できる日付計算のその他のバリエーションです。 date
ユーティリティ。http://www.cyberciti.biz/tips/linux-unix-get-yesterdays-tomorrows-date.html
http://www.cyberciti.biz/faq/linux-unix-formatting-dates-for-display/
これはRHELでうまくいきました。
BSD / OS X との互換性のために、日付ユーティリティを使用することもできます。 -j
そして -v
日付の計算をするために。を参照してください。 日付の FreeBSD マンページ. 。以前の Linux の回答とこの回答を組み合わせると、十分な互換性が得られる可能性があります。
BSD 上で Linux として実行 date
現在の日付が表示されます。
$ date
Wed 12 Nov 2014 13:36:00 AEDT
BSD の日付を使用して計算できるようになりました。 -v
, 、たとえば、明日の日付をリストします (+1d
は プラス1日):
$ date -v +1d
Thu 13 Nov 2014 13:36:34 AEDT
既存の日付をベースとして使用でき、オプションで strftime を使用して解析形式を指定し、必ず -j
システムの日付を変更しないようにします。
$ date -j -f "%a %b %d %H:%M:%S %Y %z" "Sat Aug 09 13:37:14 2014 +1100"
Sat 9 Aug 2014 12:37:14 AEST
これを日付計算のベースとして使用できます。
$ date -v +1d -f "%a %b %d %H:%M:%S %Y %z" "Sat Aug 09 13:37:14 2014 +1100"
Sun 10 Aug 2014 12:37:14 AEST
ご了承ください -v
暗示する -j
.
複数の調整を順番に行うことができます。
$ date -v +1m -v -1w
Fri 5 Dec 2014 13:40:07 AEDT
詳細についてはマンページを参照してください。
UNIX で日付の算術演算を行うには、UNIX エポックからの秒数として日付を取得し、計算を行ってから、印刷可能な日付形式に変換し直します。date コマンドは、エポックからの秒数を取得し、その数値を印刷可能な日付に変換できる必要があります。私のローカルの日付コマンドはこれを行います、
% date -n
1219371462
% date 1219371462
Thu Aug 21 22:17:42 EDT 2008
%
地元の情報を参照してください date(1)
マニュアルページ。1 日を増やすには、86400 秒を追加します。
代わりに、より自然に複雑な日付処理をサポートする Perl や Python などの言語を使用してスクリプトを作成してみてはいかがでしょうか?必ず できる すべて bash で実行しますが、perl または Python がインストールされていることを確認できる限り、たとえば Python を使用すると、プラットフォーム間での一貫性がさらに高まると思います。
Python および Perl スクリプトをシェル スクリプトに組み込むのは非常に簡単であることを付け加えておきます。
私は何度かこれに遭遇しました。私の考えは次のとおりです。
- 日付の計算はいつも面倒です
- EPOCH 日付形式を使用すると少し簡単になります
- Linux では日付は EPOCH に変換されますが、Solaris では変換されません
- 移植可能なソリューションの場合は、次のいずれかを実行する必要があります。
- SolarisにGNU日付をインストールします(すでに述べた、完了するには人間の相互作用が必要です)
- 日付部分には Perl を使用します (ほとんど UNIXインストールにはPERLが含まれているので、一般的にこのアクションが行うと仮定します ない追加の作業が必要です)。
サンプル スクリプト (特定のユーザー ファイルの経過時間をチェックして、アカウントを削除できるかどうかを確認します):
#!/usr/local/bin/perl
$today = time();
$user = $ARGV[0];
$command="awk -F: '/$user/ {print \$6}' /etc/passwd";
chomp ($user_dir = `$command`);
if ( -f "$user_dir/.sh_history" ) {
@file_dates = stat("$user_dir/.sh_history");
$sh_file_date = $file_dates[8];
} else {
$sh_file_date = 0;
}
if ( -f "$user_dir/.bash_history" ) {
@file_dates = stat("$user_dir/.bash_history");
$bash_file_date = $file_dates[8];
} else {
$bash_file_date = 0;
}
if ( $sh_file_date > $bash_file_date ) {
$file_date = $sh_file_date;
} else {
$file_date = $bash_file_date;
}
$difference = $today - $file_date;
if ( $difference >= 3888000 ) {
print "User needs to be disabled, 45 days old or older!\n";
exit (1);
} else {
print "OK\n";
exit (0);
}
date --date='1 days ago' '+%a'
これはあまり互換性のあるソリューションではありません。Linux でのみ動作します。少なくとも、Aix と Solaris では機能しませんでした。
RHEL で動作します。
date --date='1 days ago' '+%Y%m%d'
20080807
さらに詳しく調べてみると、単純に date を使用できると思います。OpenBSD で次のことを試しました。2月の日付をとりました。2008 年 29 日とランダムな時間 (080229301535 の形式) を指定し、次のように日の部分に +1 を追加します。
$ date -j 0802301535
Sat Mar 1 15:35:00 EST 2008
ご覧のとおり、日付は時刻を正しくフォーマットしました...
HTH
awk を引き続き使用する場合は、mktime 関数と strftime 関数が便利です。
BEGIN { dateinit }
{ newdate=daysadd(OldDate,DaysToAdd)}
# daynum: convert DD-MON-YYYY to day count
#-----------------------------------------
function daynum(date, d,m,y,i,n)
{
y=substr(date,8,4)
m=gmonths[toupper(substr(date,4,3))]
d=substr(date,1,2)
return mktime(y" "m" "d" 12 00 00")
}
#numday: convert day count to DD-MON-YYYY
#-------------------------------------------
function numday(n, y,m,d)
{
m=toupper(substr(strftime("%B",n),1,3))
return strftime("%d-"m"-%Y",n)
}
# daysadd: add (or subtract) days from date (DD-MON-YYYY), return new date (DD-MON-YYYY)
#------------------------------------------
function daysadd(date, days)
{
return numday(daynum(date)+(days*86400))
}
#init variables for date calcs
#-----------------------------------------
function dateinit( x,y,z)
{
# Stuff for date calcs
split("JAN:1,FEB:2,MAR:3,APR:4,MAY:5,JUN:6,JUL:7,AUG:8,SEP:9,OCT:10,NOV:11,DEC:12", z)
for (x in z)
{
split(z[x],y,":")
gmonths[y[1]]=y[2]
}
}
書籍『シェルスクリプトレシピ:問題解決アプローチ』 (ISBN:978-1-59059-471-1) Chris F.A.著Johnson には、役に立つかもしれない日付関数ライブラリがあります。ソースコードは次の場所から入手できます。 http://apress.com/book/downloadfile/2146 (日付関数は tar ファイル内の Chapter08/data-funcs-sh にあります)。
GNU バージョンの date がうまく機能する場合は、ソースを取得して AIX と Solaris でコンパイルしてみてはいかがでしょうか。
http://www.gnu.org/software/coreutils/
いずれにしても、独自のコードを作成する場合、ソースは日付の計算を正しく行うのに役立つはずです。
余談ですが、「そのソリューションは優れていますが、期待できるほど優れているわけではないことは確かです。Unix を構築するときに日付をいじることなど誰も考えていないようです。」という言葉だけでは、何も進みません。これまでの提案はどれも非常に有益で的を射ていることがわかりました。
これが私の 2 ペニーの価値です - を利用したスクリプト ラッパーです date
そして grep
.
使用例
> sh ./datecalc.sh "2012-08-04 19:43:00" + 1s
2012-08-04 19:43:00 + 0d0h0m1s
2012-08-04 19:43:01
> sh ./datecalc.sh "2012-08-04 19:43:00" - 1s1m1h1d
2012-08-04 19:43:00 - 1d1h1m1s
2012-08-03 18:41:59
> sh ./datecalc.sh "2012-08-04 19:43:00" - 1d2d1h2h1m2m1s2sblahblah
2012-08-04 19:43:00 - 1d1h1m1s
2012-08-03 18:41:59
> sh ./datecalc.sh "2012-08-04 19:43:00" x 1d
Bad operator :-(
> sh ./datecalc.sh "2012-08-04 19:43:00"
Missing arguments :-(
> sh ./datecalc.sh gibberish + 1h
date: invalid date `gibberish'
Invalid date :-(
脚本
#!/bin/sh
# Usage:
#
# datecalc "<date>" <operator> <period>
#
# <date> ::= see "man date", section "DATE STRING"
# <operator> ::= + | -
# <period> ::= INTEGER<unit> | INTEGER<unit><period>
# <unit> ::= s | m | h | d
if [ $# -lt 3 ]; then
echo "Missing arguments :-("
exit; fi
date=`eval "date -d \"$1\" +%s"`
if [ -z $date ]; then
echo "Invalid date :-("
exit; fi
if ! ([ $2 == "-" ] || [ $2 == "+" ]); then
echo "Bad operator :-("
exit; fi
op=$2
minute=$[60]
hour=$[$minute*$minute]
day=$[24*$hour]
s=`echo $3 | grep -oe '[0-9]*s' | grep -m 1 -oe '[0-9]*'`
m=`echo $3 | grep -oe '[0-9]*m' | grep -m 1 -oe '[0-9]*'`
h=`echo $3 | grep -oe '[0-9]*h' | grep -m 1 -oe '[0-9]*'`
d=`echo $3 | grep -oe '[0-9]*d' | grep -m 1 -oe '[0-9]*'`
if [ -z $s ]; then s=0; fi
if [ -z $m ]; then m=0; fi
if [ -z $h ]; then h=0; fi
if [ -z $d ]; then d=0; fi
ms=$[$m*$minute]
hs=$[$h*$hour]
ds=$[$d*$day]
sum=$[$s+$ms+$hs+$ds]
out=$[$date$op$sum]
formattedout=`eval "date -d @$out +\"%Y-%m-%d %H:%M:%S\""`
echo $1 $2 $d"d"$h"h"$m"m"$s"s"
echo $formattedout
これは私にとってはうまくいきます:
TZ=GMT+6;
export TZ
mes=`date --date='2 days ago' '+%m'`
dia=`date --date='2 days ago' '+%d'`
anio=`date --date='2 days ago' '+%Y'`
hora=`date --date='2 days ago' '+%H'`