xml :: xercesをインストールするにはどうすればよいですか?
質問
モジュールのインストール中に最新のエラーをリストするパート2をご覧ください 継続的な投稿.
通常、標準のcPANを使用してXML :: XERCES CPANモジュールをインストールしようとすると、XML :: XERCERSをインストールしようとしてください。
XML-Xerces-2.7.0-0/samples/SEnumVal.pl
...
XML-Xerces-2.7.0-0/postSource.pl
XML-Xerces-2.7.0-0/xerces-headers.txt
Removing previously used /home/adoshi/.cpan/build/XML-Xerces-2.7.0-0
CPAN.pm: Going to build J/JA/JASONS/XML-Xerces-2.7.0-0.tar.gz
WARNING
You have not defined any of the following environment variables:
XERCESCROOT
XERCES_LIB
XERCES_INCLUDE
These instruct me how to locate the Xerces header files, and the
Xerces dynamic library. If they are installed in a standard system
directory, I will located them without those variables.
However, if they have been installed in a non-standard location
(e.g. '/usr/include/xerces'), then I will need help. See the README
for more info.
Proceeding ...
WARNING
You have not defined any of the following environment variables:
XERCESCROOT
XERCES_CONFIG
Without these I cannot find the config.status file that was used to
build your Xerces-C library. Without that file, I may not be able to properly
build the C++ glue files that come with Xerces.pm.
Proceeding anyway ...
Couldn't find XercesVersion.hpp in your include directory at Makefile.PL line 1 88.
Running make test
Make had some problems, maybe interrupted? Won't test
Running make install
Make had some problems, maybe interrupted? Won't install
環境変数をに設定した後 /home/username/XML-Xerces-2.7.0-0/XML-Xerces-2.7.0-0/Xerces.pm
, 、ここに注意してください環境変数をに指すべきかどうかはわかりません Xerces.pm
また Xerces.cpp
また Xerces-extra.pm
また Xerces.i
, 、しかし今のところ、環境変数を指しています /home/username/XML-Xerces-2.7.0-0/XML-Xerces-2.7.0-0/Xerces.pm
前述のように環境変数を設定して入力した後 cpan>install XML::Xerces
次のメッセージが表示されます:
CPAN: Storable loaded ok
Going to read /home/username/.cpan/Metadata
Database was generated on Fri, 16 Oct 2009 18:27:06 GMT
Running install for module XML::Xerces
Running make for J/JA/JASONS/XML-Xerces-2.7.0-0.tar.gz
CPAN: Digest::MD5 loaded ok
CPAN: Compress::Zlib loaded ok
Checksum for /home/adoshi/.cpan/sources/authors/id/J/JA/JASONS/XML-Xerces-2.7.0-0.tar.gz ok
Scanning cache /home/adoshi/.cpan/build for sizes
XML-Xerces-2.7.0-0/
...
XML-Xerces-2.7.0-0/postSource.pl
XML-Xerces-2.7.0-0/xerces-headers.txt
Removing previously used /home/adoshi/.cpan/build/XML-Xerces-2.7.0-0
CPAN.pm: Going to build J/JA/JASONS/XML-Xerces-2.7.0-0.tar.gz
Using XERCES_LIB = /home/adoshi/XML-Xerces-2.7.0-0/XML-Xerces-2.7.0-0/Xerces.pm
using XERCES_CONFIG: /home/adoshi/XML-Xerces-2.7.0-0/XML-Xerces-2.7.0-0/Xerces.pm
- Found CXX =
- Found CXXFLAGS =
- Found LDFLAGS =
Couldn't find XercesVersion.hpp in your include directory at Makefile.PL line 188, <CONF> line 6823.
Running make test
Make had some problems, maybe interrupted? Won't test
Running make install
Make had some problems, maybe interrupted? Won't install
ノート: ダウンロードを試みました XML::Xerces
また、CPANを使用するだけでなく手動でそれをインストールしようとしていますが、上記のエラーメッセージを取得しています。
考えられる理由は何ですか、そしてこの問題の世話をするために提案できるものは何ですか?
アップデート: :Xerces-Cを構築した後でも、XML :: Xercesモジュールは構築されておらず、次のエラーメッセージを取得しています。
[adoshi@upc01.dev XML-Xerces-2.7.0-0]$ perl Makefile.PL
Using XERCES_LIB = /adoshi/lib
Using XERCES_INCLUDE = /adoshi/include/xerces
WARNING
You have defined the XERCESCROOT variable, but the file:
XERCESCROOT/src/xercesc/config.status
does not seem to point to the config.status file that was used to
build your Xerces-C library. Without that file, I may not be able to
properly build the C++ glue files that come with Xerces.pm.
Proceeding anyway ...
Couldn't find XercesVersion.hpp in your include directory /adoshi/include/xerces at Makefile.PL line 188.
update2これが得られているエラーです、それはいくつかのバージョンの不一致があると言います。
Using XERCES_LIB = /home/adoshi/XML-Parser/Parser2/xerces-c_2_8_0-hppa-hpux-acc_3(1)/xerces-c_2_8_0-hppa-hpux-acc_3/lib
Using XERCES_INCLUDE = /home/adoshi/XML-Parser/Parser2/xerces-c_2_8_0-hppa-hpux-acc_3(1)/xerces-c_2_8_0-hppa-hpux-acc_3/include
WARNING
You have defined the XERCESCROOT variable, but the file:
XERCESCROOT/src/xercesc/config.status
does not seem to point to the config.status file that was used to
build your Xerces-C library. Without that file, I may not be able to
properly build the C++ glue files that come with Xerces.pm.
Proceeding anyway ...
Using Xerces-C version info from /home/adoshi/XML-Parser/Parser2/xerces-c_2_8_0-hppa-hpux-acc_3(1)/xerces-c_2_8_0-hppa-hpux-acc_3/include/xercesc/util/XercesVersion.hpp
*** Version Mismatch ***
You are attempt to build XML::Xerces-2.7.0-0 using Xerces-C-2.8.0,
this will most likely fail, so I am aborting.
You must use Xerces-C-2.7.0
解決
一般的なルールは次のとおりです。「ルート」のようなものと呼ばれる環境変数は、ファイルではなくディレクトリを要求しています。
ただし、Perlモジュールをインストールする前に必要なXercesライブラリをインストールしたようには見えません。次に何をすべきかについて見逃したヒントとして、あなたが提供した出力の一部を引用します。
"...これらは、XercesヘッダーファイルとXercesダイナミックライブラリを見つける方法を教えてくれます..."
「これらがなければ、config.statusファイルを見つけることができません これは、Xerces-Cライブラリを構築するために使用されました"
それで、あなたはインストールしましたか xerces-c?その後、PERLモジュールをインストールするより良い結果が得られます。
他のヒント
PPMを使用してXML :: XERCESをインストールしてみましたか?